Jump to content
Forum sending old emails Read more... ×
rdh2000

Energia-1.6.10R18 Windows 7 LaunchPad MSP430G2553 don't load sketch

Recommended Posts

Energia-1.6.10R18 Windows 7 32-bit

LaunchPad MSP-EXP430G2 with MSP430G2553 chip

 

I get error when load link sketch:

usbutil: unable to find a device matching 0451:f432

 

and before many messages:

warning: missing whitespace after the macro name [enabled by default]

 

Then delete new 1.6.10R18 version and replace with old 0101E0017 one and all OK. Blink sketch loaded with no problems

 

 

Share this post


Link to post
Share on other sites

Thanks for reporting this issue. I was able to reproduce it. For now you can work around it as described below. I will make a fix available in the next MSP430 package update through the board manager.

 

  1. copy <energia directory>\hardware\tools\DSLite\DebugServer\drivers\MSP430.dll to <energia directory>\hardware\tools\msp430\bin\
  2. edit <energia directory>\hardware\energia\msp430\boards.txt an change the 2 occurrences of rf2500 with tilib
  3. restart energia and you should be able to upload to the MSP-EXP430G2 with MSP430G2553.

I have also filed an issue on github here: https://github.com/energia/msp430-lg-core/issues/12

Share this post


Link to post
Share on other sites

AWESOME !!!!

 

This works great in Energia. I am able to successfully deploy to my TI MSP430G2 Launchpad.  

 

Now, I need to get this all to work in the Code Composer Studio.

 

I open Code Composer Studio, and Select File/New/Project/Energia/Energia Sketch.  Then I get a dialog where I can specify my project name and device.  Unfortunately, it says 'No boards or targets found...  Any ideas as to how to get Code Composer Studio to recognize my MSP430G2 Launchpad?

Share this post


Link to post
Share on other sites

Thanks alot for this solution, is the fix a temporary fix or can i consider it to be as good as the version of energia that will fix the issue?

Share this post


Link to post
Share on other sites

I have the exactly same problem and i did all that. I've already edit the .txt file  (change rf2500 with tilib) and now this happens

"MSP430_GetNumberOfUsbIfs

MSP430_GetNameOfUsbIf
Found FET: HID0014:COM3
MSP430_Initialize: HID0014:COM3
tilib: MSP430_Initialize: Could not find MSP-FET430UIF on specified COM port (error = 57)
tilib: device initialization failed
 tilib: device initialization failed"
 
Can you please help me with that? 
Also, when i connect the MSP430G2553, energia just show me one serial port (COM3), but when i do the same with my MSP432 it shows me 2 serial ports (COM5 & COM6). I can make the MSP432 work with energia, but no my MSP430.
i'm using exactly the same usb port, and the original usb cable for each msp. 

Share this post


Link to post
Share on other sites

 

I have the exactly same problem and i did all that. I've already edit the .txt file  (change rf2500 with tilib) and now this happens

"MSP430_GetNumberOfUsbIfs

MSP430_GetNameOfUsbIf
Found FET: HID0014:COM3
MSP430_Initialize: HID0014:COM3
tilib: MSP430_Initialize: Could not find MSP-FET430UIF on specified COM port (error = 57)
tilib: device initialization failed
 tilib: device initialization failed"
 
Can you please help me with that? 
Also, when i connect the MSP430G2553, energia just show me one serial port (COM3), but when i do the same with my MSP432 it shows me 2 serial ports (COM5 & COM6). I can make the MSP432 work with energia, but no my MSP430.
i'm using exactly the same usb port, and the original usb cable for each msp. 

 

Make sure in the Tools->Programmer you have dslite selected and NOT rf2500

Share this post


Link to post
Share on other sites

Make sure in the Tools->Programmer you have dslite selected and NOT rf2500

i've already done that. It works on my laptop (W7) but it didn't work on my pc (w10). But thanks, i think it's another kind of problem. I'll check that.

Share this post


Link to post
Share on other sites

Make sure in the Tools->Programmer you have dslite selected and NOT rf2500

i've already done that. It works on my laptop (W7) but it didn't work on my pc (w10). But thanks, i think it's another kind of problem. I'll check that.

Share this post


Link to post
Share on other sites

i've already done that. It works on my laptop (W7) but it didn't work on my pc (w10). But thanks, i think it's another kind of problem. I'll check that.

OK. BEcause I ran into this issue just today on my W10 machine and solved it doing this.

Share this post


Link to post
Share on other sites

Hi All

I'm new to this forum only having recently purchased one of the launchpads. I'm having the same problem as above on windows 10 is there another work around or is it best to revert to R17.

 

Share this post


Link to post
Share on other sites

To those still struggling to run R18 after following the 3 steps suggested by energia Lvl 4 click, File/Preferences/Settings  and make sure that the sketchbook location path does not contain any spaces.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×