Jump to content
danirebollo

SSD1289 3.2" 320x240 TFT 16bit parallel interface + Touch + Libraries

Recommended Posts

Hello! 

i made a boosterpack for the SSD1289 3.2" TFT (16bit color) with touch interface and connectors for I2C and other free pins. 

Also, i change texas instruments graphic library to drive ssd1289. I built a prototype and works well

 

Now im waiting for pcbs that i have order. 

post-1578-14264605256069_thumb.jpg

post-1578-14264605256589_thumb.jpg

post-1578-14264605282823_thumb.jpg

Share this post


Link to post
Share on other sites

This boosterpack is compatible with all examples of stellarisware and other from graphics library, Kentec, kitronix and adafruit tft graphic examples (of course, changing lcd and touch driver)

Share this post


Link to post
Share on other sites

Very neat! Did you get the touch working well?

yes!! everything works!!

as analog device, you need to calibrate LCD touch to work well. Use calibration function (only first time) an later write these values into touch.c

Share this post


Link to post
Share on other sites

Hello again! 

There are people interested in buying PCB alone or PCB with components mounted? or PCB and components separated?

 

I just make a page in my blog to sell this: 

http://danirebollo.blogspot.com.es/2013/05/ssd1289-boosterpack-32-320x240-tft.html  http://danirebollo.es/index.php/items?option=com_content&view=article&id=1&Itemid=1-lcdbpv2&showall=1  [new web]

Share this post


Link to post
Share on other sites

Hi,

 

My name is Moacir, I am braziliam, and I am new here.

 

I am using a HY32D, that use a SSD1289 too. I am trying to use, but also using libraries and anothers thinks, but the maximum I could get is some disconnected lines and smudges.

 

You can send your source code to this project plz, for me compare with my program? I will apreciate so much.

 

 

Thanks a lot.

Moacir Jr.

Share this post


Link to post
Share on other sites

Hi,

 

My name is Moacir, I am braziliam, and I am new here.

 

I am using a HY32D, that use a SSD1289 too. I am trying to use, but also using libraries and anothers thinks, but the maximum I could get is some disconnected lines and smudges.

 

You can send your source code to this project plz, for me compare with my program? I will apreciate so much.

 

 

Thanks a lot.

Moacir Jr.

hello. Check out my blog http://danirebollo.blogspot.com.es/2013/05/ssd1289-boosterpack-32-320x240-tft.html http://danirebollo.es/index.php/items?option=com_content&view=article&id=1&Itemid=1-lcdbpv2&showall=1 [new web]

Also, some connections are different.

Analog touch are directly connected, rd are pullup...

greetings

Share this post


Link to post
Share on other sites

Hi,

 

My name is Moacir, I am braziliam, and I am new here.

 

I am using a HY32D, that use a SSD1289 too. I am trying to use, but also using libraries and anothers thinks, but the maximum I could get is some disconnected lines and smudges.

 

You can send your source code to this project plz, for me compare with my program? I will apreciate so much.

 

 

Thanks a lot.

Moacir Jr.

Hi Robert,

I too am using the same module and have interfaced it with the module in 16bitmode. (It only supports that). I appreciate the effort taken by you to write a self explainatory code. I compiled the code and loaded into Tiva(EK-TM123GXL). The LCD is not displaying correctly. I observed that Rect(),PixelDraw(),etc functions are not working properly in all the part of the LCD(ie only partial display or banding). When I try to draw a Horizontal line using LineH() it works perfectly. But when I draw a Vertical line using LineV(), I am having the similar issues mentioned above. What do you recon may be the problem? What do you suggest I do to debug it?

Thank you

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...