veimmone 0 Posted April 13, 2013 Share Posted April 13, 2013 Hi all, I created a 3D model of the Stellaris LaunchPad and thought I could share it, so here goes: https://dl.dropboxusercontent.com/u/2496393/StellarisLaunchpad.STEP (attaching .STEP files is not allowed, so Dropbox for now) I included all components I thought had some external relevance (and the chip itself for looks). All the pin positions are according to the LaunchPad manual, so they should be accurate. Other positions have been measured with a caliper, but as always - trust but verify. Dimensions of the pins themselves (apart from height) should not be trusted, they're mostly for looks. If you need it in another format, ask and you might receive. StellarisLaunchpad.STEP bluehash and Jigar4Electronics 2 Quote Link to post Share on other sites
bluehash 1,581 Posted April 13, 2013 Share Posted April 13, 2013 Hi all, I created a 3D model of the Stellaris LaunchPad and thought I could share it, so here goes: https://dl.dropboxusercontent.com/u/2496393/StellarisLaunchpad.STEP (attaching .STEP files is not allowed, so Dropbox for now) I included all components I thought had some external relevance (and the chip itself for looks). All the pin positions are according to the LaunchPad manual, so they should be accurate. Other positions have been measured with a caliper, but as always - trust but verify. Dimensions of the pins themselves (apart from height) should not be trusted, they're mostly for looks. If you need it in another format, ask and you might receive. Thanks! I added a STEP attachment type. Quote Link to post Share on other sites
Da799 0 Posted March 9, 2014 Share Posted March 9, 2014 Hello veimmone how can i open this file? which program? Thank you Quote Link to post Share on other sites
icserny 9 Posted March 9, 2014 Share Posted March 9, 2014 Hello veimmone how can i open this file? which program? Thank you See in the STEP file FAQ: http://www.pcb-3d.com/knowledge-base/step-file-faq Quote Link to post Share on other sites
joelfinkle 1 Posted March 13, 2014 Share Posted March 13, 2014 Is there anyone with the tools to flatten this down into a Fritzing part with appropriate headers & jumpers? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.