RobG 1,892 Posted November 16, 2012 Share Posted November 16, 2012 This is a remake of my original BP for MSP430 LaunchPad. Based on WIZnet's W5200 controller. bluehash 1 Quote Link to post Share on other sites
bluehash 1,581 Posted November 16, 2012 Share Posted November 16, 2012 This is a remake of my original BP for MSP430 LaunchPad. Based on WIZnet's W5200 controller. Loks like all components up top. Oven friendly vmsbarbosa 1 Quote Link to post Share on other sites
elimpnick 0 Posted December 24, 2012 Share Posted December 24, 2012 Looks good, any chance it will be stackable so that you could use other packs and accessories with it? Nick Quote Link to post Share on other sites
RobG 1,892 Posted December 28, 2012 Author Share Posted December 28, 2012 It all depends on what headers are used. However, you have to keep in mind that MagJack is 0.5" high. Quote Link to post Share on other sites
Nytblade 24 Posted January 3, 2013 Share Posted January 3, 2013 Is the pinout the same as the old one? Quote Link to post Share on other sites
RobG 1,892 Posted January 3, 2013 Author Share Posted January 3, 2013 Pretty much. The only difference is the memory chip. Quote Link to post Share on other sites
RobG 1,892 Posted September 24, 2013 Author Share Posted September 24, 2013 I have 2 of them available if anyone is interested. $18 + s/h. Quote Link to post Share on other sites
RobG 1,892 Posted November 22, 2013 Author Share Posted November 22, 2013 Ethernet BoosterPack v3 is finally here. Quote Link to post Share on other sites
RobG 1,892 Posted April 19, 2014 Author Share Posted April 19, 2014 Tiva library is almost ready Quote Link to post Share on other sites
Sahil 0 Posted May 11, 2014 Share Posted May 11, 2014 Dear All, I am interested to play with any Ethernet booster pack with my LM4F120 launchpad, I want to communicate with my launchpad via Ethernet using Hypertermincal. I have not so far bought any Ethernet booster pack but the one mentioned above seems to be a good candidate. Is there any one who could share the required library for interfacing WIZnet's W5200 controller with LM4F120 and to make the communication via Hyperterminal. ? Also I dont know what is the communication protocol on Hyperterminal via Ethernet, UDP or TCP/IP ? Thank you all in advance. Quote Link to post Share on other sites
spirilis 1,265 Posted May 11, 2014 Share Posted May 11, 2014 Hyperterminal would be used to talk to the Tiva/Stellaris' serial port over USB. Ethernet lets the microcontroller talk with the rest of the world via IPv4 (TCP/UDP). Quote Link to post Share on other sites
Sahil 0 Posted June 4, 2014 Share Posted June 4, 2014 @@spirilis I agree with you but you can use hyperterminal to talk to the microcontroller by mentioning the ip address and the port of the microcontroller (via ethernet booster pack) in the hyperterminal configuration setting. Quote Link to post Share on other sites
spirilis 1,265 Posted June 4, 2014 Share Posted June 4, 2014 Ah didn't know that. Is it telnet that it's using there? Quote Link to post Share on other sites
Sahil 0 Posted June 4, 2014 Share Posted June 4, 2014 no as a Raw data. Quote Link to post Share on other sites
spirilis 1,265 Posted June 4, 2014 Share Posted June 4, 2014 no as a Raw data. Ah k, so basically Telnet then. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.