Jump to content

New NXP M0 LPC11U35 Quickstart board

Recommended Posts

NXP released a new M0 arm kit today - The LPC11U35 QuickStart Board. Pretty tiny for its size. made by Embedded Artists.






  • Processor NXP's Cortex-M0 LPC11U35 microcontroller in 33-pin HVQFN package.
  • Program Flash 64 KB
  • Data Memory 10 KB + 4 KB EEPROM
  • Clock Crystals 12.000 MHz crystal for maximum execution speed and standard serial bit rates, including USB requirements. The LPC11U35 runs at frequencies up to 50 MHz.
  • Interfaces / Connectors • All LPC11U35 I/O pins are available on edge expansion connectors, in DIL-30 structure suitable for bread board prototyping (dual 15 pos, 100 mil/2.54 mm pitch rows, 700 mil/17.78 mm apart).
  • On-board USB Device interface, with mini-B USB connector and proper ESD protection.
  • Dimensions 21 x 40 mm
  • Power Flexible powering, with on-board 150mA 3.3V voltage regulator (can be powered from USB connector or an external +5V supply).
  • Connectors
  • All LPC11U35 I/O pins are available on connectors.
  • mini-B USB connector.
  • SWD/JTAG connector (0 mil/1.27 mm pitch, standard SWD/JTAG connector).
  • Onboard reset generation and reset push-button.
  • Push-button for enabling Bootloader mode of the LPC11U35.
  • LED on pin PIO0_7.
  • 2 pcs 1x15 pinlists included, but not soldered.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...