Jump to content
43oh

Recommended Posts

I bought C2000 a 1 week ago. I started working today, have been working from last 6 hours. Problem is when ever I flash the program into the C2000 it gets uploaded but whenever I press reset button then program gets lost. All this is happening in Energia IDE.

 

Correct me if I am doing something wrong. Reply asap 

 

Thank You

 

Link to post
Share on other sites
  • 3 weeks later...

Shamsheer,

 

This is due to the boot modes of the device.  When we flash with Energia, we use the serial boot mode to load the program into the device.  When the load completes it automatically starts running the application.  

 

Pressing the reset button without changing the boot switches will put the board back at the start of the serial boot mode.

 

Instead, change the switches to UP-UP-DOWN, reset the board and your application should run.  This selects the boot to flash mode (which is where your application is stored).

 

BR,

Trey

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...