rolando07 4 Posted May 10, 2014 Share Posted May 10, 2014 Hello, my name is Rolando Correa. I am a Junior student at John Brown University located in Siloam Springs, Arkansas. This semester I have been working in a project called "The Pool Boy" for my Embedded Systems class. Project Objective The purpose of this project was to design and assemble a pool skimming system. The final product, the Pool Boy, can autonomously navigate and filter the surface of an 800 square foot pool in under 60 minutes. It filters the surface of the pool via water intake system driven by high efficiency electrical motors. The Pool Boy follows a random path based on a "random generated number" to efficiently cover the entire surface of any size or shape of pool. The onboard proximity sensor allows it to navigate around stray objects and pool walls without collision. The embedded solar panels continuously charge the included rechargeable battery. Parts 1 Texas Instruments MSP430G2553 1 Proximity Sensor (4-30cm range) 3 Small Solar Panels (0.1mA each output current) *this turned out to be less than expected. 2 Green LED's 1 Red LED 1 On/Off Switch 1 Rechargeable Battery (7.4 V) 2 EDF 50mm DC Motors High Density Foam 1 MOSFET Driver (4426) 2 Power MOSFET 1 Voltage regulator Feel free to leave a comment for more information. Thanks! Automate, pine, tripwire and 1 other 4 Quote Link to post Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.