vassilij 0 Posted January 16, 2014 Share Posted January 16, 2014 Hi guys! I'm trying to use energia for a simple TX/RX with cc1101 and launchpad + msp430g2452, but i don't know how to use spi to comunicate cc1101 with msp430 in energia interface... can sombody help me? I'am using: Energia 0101E0011 windows 7 (64 bits) Quote Link to post Share on other sites
dubnet 238 Posted January 16, 2014 Share Posted January 16, 2014 You may want to take a look at the library reference for the Air Booster Pack located here: C:\energia\energia-0101E0011\reference\Library_AIR430Boost.html Note that this is not a web based URL but points to the documentation within Energia. Your path may not be the same as mine so you may need to adjust the path based on your local installation. Not sure if the library works with the 2452...you may want to try the 2553. Someone else may have better information on this than I do. vassilij 1 Quote Link to post Share on other sites
vassilij 0 Posted January 17, 2014 Author Share Posted January 17, 2014 The AIR430Boost library is designed for a boosterpack (cc101L and msp430g2553), but when i try to compile in msp430g2452 it produce several erros... how can i configure this library to use with 2452? Quote Link to post Share on other sites
bblincoe 1 Posted January 17, 2014 Share Posted January 17, 2014 The CC110L is a trimmed down version of the CC1101. The AIR430Boost library only supports CC110L. You'll have to read up on the register differences between the CC110L/CC1101 and make the changes to the library. All function calls can remain the same, just change register values. You can visit Anaren's website under AIR and support to find valid FCC/ETSI settings for the CC1101-based RF modules. Edit: It currently only supports MSP430G2553. You'll have to make a few modifications to use it with your MCU. vassilij 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.