squinion 0 Posted April 3, 2011 Share Posted April 3, 2011 hi this is my first time posting and i was wondering if i could get some help. im working on an art project where i connect piezo vibration sensors to drums which will then turn lights on when struck. if anybody could give me any information on parts i'll need or set up this will be greatly appreciated Quote Link to post Share on other sites
gatesphere 45 Posted April 3, 2011 Share Posted April 3, 2011 Hello, and welcome! If you're using piezos as vibration sensors, I'd suggest 1 10k resistor and 1 3V3 Zener diode per sensor, both bridging the two leads (not sure which direction the diode should face, it's been a while). As for the lights, LEDs work just fine, string several of them together, possibly using transistors to do current switching. I'm sure others on here would know more about that. Best of luck, and be sure to post pictures when you're done! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.