Jump to content
43oh

Recommended Posts

Thought I'd start a new topic for this since a few of us are getting one.

 

Poking around their website, it appears http://noritake-vfd.com/gu512x32h-3900b.aspx supersedes the units being given away, which is GU512x32h-3900. That display is what's on the Christmas tree at http://noritake-vfd.com landing page and these kits: http://noritake-vfd.com/networkdisplaykit.aspx and http://noritake-vfd.com/messageselectorkit.aspx.

 

Reading through datasheets and sites the unit has RS232 and parallel interfaces, 4 bit input and 8 bit GPIO that can respond to or activate external components. It requires both 5v and 24v, has normal command and graphic DMA modes, supports macros in flash that can run unsupervised / without external MCU, and 32K + 64K(*4) flash rom.

 

I'm thinking this might be a candidate to include in the dashboard on my motorcycle if it's not too large, and I can coax 24v from the bike somehow.

Link to post
Share on other sites
  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

@@SteveR   CN1|GPIO is IRISO IMSA-9023B-14P CN2|Serial is JST B7B-XH-A CN5|Parallel is IRISO IMSA-9023B-16P CN6|Power is JST B5B-XH-A - note these are the connectors on the display, not the

Just received mine.  Easily the largest display I have ever handled.   They included a single fact sheet with a number of PDFs referenced for the unit.  It is stated that the base model # is GU512X

Thought I'd start a new topic for this since a few of us are getting one.   Poking around their website, it appears http://noritake-vfd.com/gu512x32h-3900b.aspx supersedes the units being given awa

Posted Images

Just received mine.  Easily the largest display I have ever handled. :smile:

 

They included a single fact sheet with a number of PDFs referenced for the unit.  It is stated that the base model # is GU512X32H-3703 which is hardware/software compatible with the GU512X32H-3900 (minus the "B" at the end which, as @@abecedarian mentioned in his initial post, appears to be the newer model).  It took a bit to find the web page that referenced the PDFs on the fact sheet.  This page has most of them:

 

http://www.noritake-itron.com/pages/specs/largegraphic/GU512x32H-3900.htm

 

Still searching for the last one of the referenced PDF's.  Will post if I find it.

Link to post
Share on other sites

This is what I've grabbed so far- note account / login may be required:

 

GUD10K:http://www.noritake-elec.com/gud10k.html

Windows-based software allows you to use the RS232 adapter kit to program / record "macros" for the display to run.

 

International font tables: http://www.noritake-elec.com/form.php/s-gu3xxxintfont_e03.pdf

Macro spec: http://www.noritake-elec.com/form.php/s-gu3xxxpmacro_e03.pdf

Software spec: http://www.noritake-elec.com/form.php/s-gu512x32dot-39xxsoft_e02.pdf

Hardware spec: http://www.noritake-elec.com/form.php/s-gu512x32h-3xxxhard_e04.pdf

 

GU3000 series web page: http://www.noritake-elec.com/3000_series.htm

The page isn't that intuitive, but if you scroll down to the tables listing the models / part numbers, the columns titled "Interface", "Datasheet", "Font Tables" and "Tools & Software", the text in those are hyperlinks to documents.

Edited by abecedarian
Link to post
Share on other sites

Might just have an internal step-up. The existing 128x64 or whatever kit we just got included some form of boost converter onboard. Probably why it uses so much darned power...

 

Sent from my Galaxy Note II with Tapatalk 4

Probably correct. It's just it says 5v & 24v, not 5v OR 24v.

I guess we'll no more soon. :D

Link to post
Share on other sites

@@spirilis Here are some pictures of the front and back.  Front pic is a little blurry but there isn't much to see on the front side.  The AA battery is there for scale.

 

@@abecedarian looking at the datasheet it doesn't appear there is a 5V only power option.  Perhaps that was one of the improvements with the "B" model.  Max total power dissipation (5V and 24V) is about 9W (6.9W typical) with all dots on and about 8W (5.4W typical) with all dots off. In addition, it looks like the 24V supply needs to be able to handle 2x the rated datasheet value (inrush current) so we will need 700ma+ for the 24V supply. Or a big cap. :smile:

post-183-0-16949300-1387562727_thumb.jpg

post-183-0-98461200-1387562736_thumb.jpg

Link to post
Share on other sites

@@dubnet - Yes, the documentation is vague on it. Other models, like the GU256x64-3900B are 5v only, so it doesn't seem to be a physical requirement for 24v given that one would have the same pixel count. There are mentions of being able to chain displays so maybe this is where the 24v comes in? There's not much documentation out there on these things other than the datasheets and a few sparsely commented projects using them.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...