MSP430G2553

[srv 2]

i am using MSP430G2 launchpad with MSP430G2553 controller.but when i program it and make a pin high i am getting 1.4-1.6 v only please help.

[roadrunner84 466]

you're doing it wrong.

 

give us some code to look at, you're being too vague

[srv 2]

So how can i do it in rihgt way

[srv 2]

/*
  Blink
 The basic Energia example.
 Turns on an LED on for one second, then off for one second, repeatedly.
 Pin 2 has an LED connected on MSP430 boards, has a name 'RED_LED' in the code.
 
 Hardware Required:
 * MSP-EXP430G2 LaunchPad
 
 This example code is in the public domain.
 */

// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
  pinMode(P2_2, OUTPUT); 
}

// the loop routine runs over and over again forever:
void loop() {
   digitalWrite(P2_2, HIGH);  
   // turn the LED on (HIGH is the voltage level)
}
 

this is my code

[abecedarian 330]

Red LED is on P1_0, green is on P1_6.

[dubnet 238]

I don't see a 1 second delay in your code.

[roadrunner84 466]

First off, your code does not actually do blinking. Second, if you stripped your code, maybe you measure the average of on and off (so about 3 volts)

[srv 2]

I not blinking led.i am just checking voltage.

 

Sent from my ST26i using Tapatalk

 

 

[abecedarian 330]

What are you trying to accomplish?

[srv 2]

Iam working in a peoject and i am new in msp430.could you please telk me how to interface lcd 16*2 with msp430?

 

Sent from my ST26i using Tapatalk

 

 

[chicken 630]

I not blinking led.i am just checking voltage.

 

How and where do you measure the voltage?

[srv 2]

By multimeter...

 

Sent from my ST26i using Tapatalk

 

 

[Rei Vilo 695]

@srv 

 

Give a look at the answer here at http://forum.43oh.com/topic/4614-help-for-softwareserial-in-msp430f5529-launchpad/?p=41507