Jump to content
Techman187

No such directory or file on Mac error message

Recommended Posts

I am running Energia 1.8.11E23 on a MacBook Pro running High Sierra.  I am using the MSP430G2 Launchpad with a 2553 processor.

I am compiling the Blink program.  When I try to upload,  I get an error: '/var/folder/fh/5b29m6tx5rsdj4qxnz9r4snk80000gq/T/arduino_build_360622/Blink.ino.hex ': no such file or directory.

I can go to my terminal program and execute a ls command on that same path and file name and the file exists!  I can check permissions on that directory and file and they are correct.

So, the question is "Why can't the Energia program access that file and complete the download"??

Share this post


Link to post
Share on other sites

I find it hard to believe that 50 people have viewed this post and no one has any suggestions.   I can't be the only person that has had this problem.🤨

Share this post


Link to post
Share on other sites

I have the same problem. On Linux, lunchpad MSP430G2, MCU 430G2553

Here error message:

===

Energia: 1.8.11E23 (Linux), Плата:"MSP-EXP430G2 w/ MSP430G2553"

Скетч использует 380 байт (2%) памяти устройства. Всего доступно 16384 байт.
Глобальные переменные используют 20 байт (3%) динамической памяти, оставляя 492 байт для локальных переменных. Максимум: 512 байт.
MSPDebug version 0.24 - debugging tool for MSP430 MCUs
Copyright (C) 2009-2016 Daniel Beer <dlbeer@gmail.com>
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Chip info database from MSP430.dll v3.3.1.4 Copyright (C) 2013 TI, Inc.

Trying to open interface 1 on 115
rf2500: warning: can't detach kernel driver: No data available
Initializing FET...
FET protocol version is 30394216
Set Vcc: 3000 mV
Configured for Spy-Bi-Wire
Sending reset...
Device ID: 0x2553
  Code start address: 0xc000
  Code size         : 16384 byte = 16 kb
  RAM  start address: 0x200
  RAM  end   address: 0x3ff
  RAM  size         : 512 byte = 0 kb
Device: MSP430G2xx3
Number of breakpoints: 2
fet: FET returned NAK
warning: device does not support power profiling
Chip ID data:
prog: '/tmp/arduino_build_265623/sketch_oct08a.ino.hex': No such file or directory
  ver_id:         5325
  ver_sub_id:     0000
  revision:       00
  fab:            60
  self:           0000
  config:         00
Device: MSP430G2xx3
Произошла ошибка при загрузке скетча

Этот отчёт будет иметь больше информации с
включенной опцией Файл -> Настройки ->
"Показать подробный вывод во время компиляции"


==================

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...