Jump to content
43oh

Playing with CC3000 on MSP430F5529 with Energia


Recommended Posts

AFAIK you don't have to do stepwise firmware updates.  I updated an SP 1.7 firmware to 1.11.1 in one step.  (Though that was just as 1.11.1 was released, so perhaps since then there are warnings not to do that.)

 

Updating is definitely a good idea.  Older versions of CC3000 (especially pre 1.10) are horrible.

Link to post
Share on other sites
  • Replies 36
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Not sure it fits your plans, but I've got a git repository with the TI Host Driver and a few patches at https://github.com/pabigot/cc3000 that works well with mspgcc. This is only Host Driver version

BTW - I was able to get my 5529LP and CC3000 device to connect to a WPA2 router successfully with the new 0012 version of Energia that was released.

Ok fwiw...   #include "netapp.h"     later on: uint32_t dhcpIP, dhcpSubnet, dhcpDefaultGW, dhcpDNS;   if (netapp_dhcp(&dhcpIP, &dhcpSubnet, &dhcpDefaultGW, &dhcpDNS) != 0) {  

  • 4 weeks later...

hi

 

I have this set of codes, i managed to connect to the network but i unable to connect to the internet, do i need to set my gateway?

if so  does anyone know how to set a gateway 

 

#include <SPI.h>
#include <wifi.h>
 
char ssid[]="ssid";
unsigned char pass[]= "password";
// gateway[]="192,168,1,1"; 
 
 
void setup()
{
  Serial.begin(9600); 
  WiFi.setCSpin(18);
  WiFi.setENpin(2);
  WiFi.setIRQpin(19);
 
}
 
void loop()
{
 
   byte test=WiFi.begin(ssid,pass); //if got variable inside, cannot run. but when no variable can run. LOGIC?? 
 //server.begin(); 
  Serial.println(test);
  Serial.print("Connected to:");
  Serial.println(ssid);
  
  
 
  
  
}
Link to post
Share on other sites

Hello Naishadh,

 

you have to update the simplelink libraries and some other stuff as described in post #29. Then most of the stuff will work.

Be careful with UDP, there seem to be something not working yet.

 

Regards, Thorvard

 

Hello there,

    I am building a wi-fi switch using  MSSP430F5529 Launch pad and CC3000 booster pack. I tried to run the Simplelink web server example on the Energia software, but m getting so many errors..

can any one suggest me how to get through to this problem..

Waiting for the reply..

Regards, Naishadh. 

Link to post
Share on other sites
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...