Jump to content
Sign in to follow this  
vinietje

[Energia Library] 433mhz LedStrip controllers

Recommended Posts

Hi Gents,

 

I've modified the SpaceLen driver to receive commands from '433mhz remotes' to drive ledStrips. These controllers + remote cost a whoping 5$, and drive upto 2A a led (so 6A in total, so rather cheap for the capabilities.

 

Using this library, you mimic the remote. Unfortunately sending custom commands, other than replayed remote commands seems impossible, without flashing the original uC in the receiver. 

 

For now i've just finished the reception of the remotes, but an addition to sending these commands is in the making.

 

 

 

edit: both sending and receiving works.

 

The code can be found on: https://github.com/vinietje/LedProtocol

the controllers look like: https://github.com/vinietje/LedProtocol/blob/master/docs/Controller.jpg

the timing of the signals: https://github.com/vinietje/LedProtocol/blob/master/docs/Timing%20signal.png

 

I which I could be more specific regarding type-numbers and, such, but the Chinese are very limited regarding these unfortunately, eq, the chips inside the remotes don't bear any markings :-( and prints like '433mhz' and 'paired 1-on-1' aren't gonna cut it...

 

 

please keep in mind that due to the lack of a 'change event' i have used a workaround, although in the latest commits on Energia this issue is resolved. So when using them, you will need to alter the interupt routine.

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...