cyberman_ff 3 Posted February 24, 2014 Share Posted February 24, 2014 Out of stock (the shock is overweliming) heh. I waited 2 days too long darn it. Anyhow this I can see as a popular item because DIY with the flexible interconnect is a real pain (hehehe). putting the smt flex interfaces on can be harrowing (even if you done it a few times) also the SD card socket is a definate bonus. That's just me saying "cool but I missed out the last batch". Cyb Quote Link to post Share on other sites
RobG 1,892 Posted February 25, 2014 Author Share Posted February 25, 2014 @@cyberman_ff, back in stock. cyberman_ff 1 Quote Link to post Share on other sites
cyberman_ff 3 Posted February 25, 2014 Share Posted February 25, 2014 @@cyberman_ff, back in stock. @@RobG in words of one syllable "oh". Hmmm here I had my own woe is me thing planned out for the next week. Darn just have to make do with some LCD's instead. Thanks again. You know I probably should download the library too (just a sudden thought huh?) Cyb Addendum received, thanks. Quote Link to post Share on other sites
bluehash 1,581 Posted February 27, 2014 Share Posted February 27, 2014 As a note, the LCD boosterPack is also available in The 43oh Store in addition to Rob's Tindie Store. Quote Link to post Share on other sites
cyberman_ff 3 Posted March 4, 2014 Share Posted March 4, 2014 And now for something completely different suggestions 1: PDF of the schematic if it behoves the author to do so? I just hate trying to print PNGs and color (IE I want BW and fine pixel resolution). 2: A big white patch or something to indicate which side of the board toward what pins, or marking the 3.3V pin and ground pin on the side that mates to the lunchpad (or launchpad ) 3: otherwise pretty cool Did you use KiCAD to do the schematic? Cyb Quote Link to post Share on other sites
RobG 1,892 Posted March 4, 2014 Author Share Posted March 4, 2014 Here it is, PDF schematic. Color LCD BP 320x240.pdf Quote Link to post Share on other sites
cyberman_ff 3 Posted March 5, 2014 Share Posted March 5, 2014 Here it is, PDF schematic. Color LCD BP 320x240.pdf Thank you just what I asked for. The pdf says you have a mac. Again thanks. Quote Link to post Share on other sites
RobG 1,892 Posted April 6, 2014 Author Share Posted April 6, 2014 Tiva library is now available bluehash 1 Quote Link to post Share on other sites
RobG 1,892 Posted April 8, 2014 Author Share Posted April 8, 2014 New version is now available. New in v3: - no MOSI/MISO config - no optional memory - 4 configuration jumpers CS_Display, CS_SD, D/C, and BKG (choose legacy pinout or compliant with new LPs.) Pos/Pin CS_Dis CS_SD D/C BKG New(1) P2.5 P2.4 P1.3 P2.0 Legacy(2) P1.0 P2.5 P1.4 P2.2 Schematic: 320x240 LCD BP v3.pdf Quote Link to post Share on other sites
wrcgator 0 Posted August 23, 2014 Share Posted August 23, 2014 Has anyone used the SD interface yet? Ported tinyfs to this board? Quote Link to post Share on other sites
dpharris 13 Posted August 24, 2014 Share Posted August 24, 2014 Here it is, PDF schematic. Color LCD BP 320x240.pdf Niggle: I noticed that the comment next to HOLD signal does not match the diagram (JP10 vs JP7). FWIW. Quote Link to post Share on other sites
RobG 1,892 Posted August 24, 2014 Author Share Posted August 24, 2014 Hi @@dpharris, there are several versions of this BP. See post #54 for the latest one (v3) BTW, I think you have LCD BP with Touch, see here. Quote Link to post Share on other sites
mmessuri 0 Posted October 13, 2014 Share Posted October 13, 2014 Well at this point I feel stoopid as I am trying to get the display up-and-running on a Tiva C TM4C123G eval board and am having 0% luck. After struggling to get the code to compile (using ccs6 and building the Tiva version of ugl16tiva.zip) I was able to flash the board; however, the problem is that I am still only receiving a white screen (the lights are on but no-one is home). While trying to resolve this issue I have been digging through the schematic along with the new layout mentioned for the v3 board (which looks like the mapping for the pins is now: P2.5 maps to PA4, P2.4 maps to PA3, P1.3 maps to PE4 and P2.0 maps to PA5) but all my attempts have failed. I am going to keep plugging away but if anyone has any suggestions I would greatly appreciate them! Thanks. -- Michael Messuri -- Never mind. I disconnected everything then reconnected everything and now all is well. Go Figure. Quote Link to post Share on other sites
njensen 0 Posted October 16, 2014 Share Posted October 16, 2014 Rob, A few months ago I purchased a handful of these from you: http://store.43oh.com/index.php?route=product/product&product_id=80 Development has progressed nicely, but I think we are ready for the next step. We really need a touch screen. I can see that you built some booster packs (albeit a bit smaller than these) with touch screens. However, they also appear to be sold out everywhere I look. Can you give me a quick update on this product, (or anything similar for that matter). Are you planning to build more? What is the timeline for availability? If you are not planning on building any in the near future, do you know of any that are currently available that you would recommend? Thanks for your help... It sure is nice having these devices as available on a boosterpack Respectfully, Nate Quote Link to post Share on other sites
RobG 1,892 Posted October 16, 2014 Author Share Posted October 16, 2014 I will have ~20 touch screens available in about a week or two. 10 are already spoken for. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.