bluehash 1,581 Posted January 20, 2012 Share Posted January 20, 2012 Just came in today along with the Wiznet Wifi PCBsFirst test successful with code from here.Card detect LED needs to be added in. Currently running on a 2553 USCI. Jumper support is available for 2452 USI too.Schematics in a few days. I'm too tired right now.Latest code:CodeSuggested for Next Rev:1.Add mini SD support2.Wire gnd line to pid 6 of sd card connector. Thanks Rick!3. Add micro SD support?4. Dac/LM386(<-Rick's suggestion) larsie, woodgrain, Rickta59 and 3 others 6 Quote Link to post Share on other sites
cde 334 Posted January 23, 2012 Share Posted January 23, 2012 Nice. Future Revisions possibility, footprints for both sd and mini-sd/transflash cards. One board, you can solder them up as ordered. Quote Link to post Share on other sites
bluehash 1,581 Posted January 23, 2012 Author Share Posted January 23, 2012 Good point cde. This was a test run. I'll add this to the bottom of the post as Suggested To-Do Features. Quote Link to post Share on other sites
kenemon 29 Posted January 28, 2012 Share Posted January 28, 2012 It was great to watch you go through the process with this one blue. Turned out great! I was looking at those SD adapters the other day and was surprised at their price. Have you found any reaonable sources for them? Quote Link to post Share on other sites
bluehash 1,581 Posted January 28, 2012 Author Share Posted January 28, 2012 Thanks. I bought those holders from digikey. They were around a buck or so for one. Quote Link to post Share on other sites
wangfuchong 0 Posted March 1, 2012 Share Posted March 1, 2012 Can give codes for G2452? I'm coding ,using a G2452,but always have a problem on Init,CMD0 can not return 0x01 Quote Link to post Share on other sites
bluehash 1,581 Posted March 1, 2012 Author Share Posted March 1, 2012 It should be relatively easy to change it to 2452 USI code. The code was created for the 2553 USCI. Look in the disk.c folder where you can change the low level driver api. Quote Link to post Share on other sites
woodgrain 0 Posted April 19, 2012 Share Posted April 19, 2012 Bluehash, Thanks for sharing this. Is the bare board from the store the same as this? ( DEV-MSP-SDCARD-BOOST-PCB ). Can you provide the part number for the SD Card socket? Quote Link to post Share on other sites
bluehash 1,581 Posted April 19, 2012 Author Share Posted April 19, 2012 It's the same one. sdcard part no: 101-00565-64-ND Quote Link to post Share on other sites
lokkju 0 Posted July 14, 2012 Share Posted July 14, 2012 Any update on the G2452 code? According the store, it is supposed to work with USI, but I don't see any code for that anywhere... Quote Link to post Share on other sites
bluehash 1,581 Posted July 14, 2012 Author Share Posted July 14, 2012 By USI, it means there are solder jumpers to do that. All code is for the 2553 now. Quote Link to post Share on other sites
chandra 0 Posted January 19, 2013 Share Posted January 19, 2013 can any one help me RTC code for msp430f5510 Quote Link to post Share on other sites
bluehash 1,581 Posted January 19, 2013 Author Share Posted January 19, 2013 can any one help me RTC code for msp430f5510 Hi Chandra, welcome to 43oh. You need to tell us what you have and post your code here. Also, it would be good if you have a new thread for your question. Quote Link to post Share on other sites
timotet 44 Posted March 22, 2013 Share Posted March 22, 2013 @@bluehash Are these available without the headers soldered on? thanks Tim Quote Link to post Share on other sites
bluehash 1,581 Posted March 22, 2013 Author Share Posted March 22, 2013 @@timotet Send me a note in the comment box. I also emailed you on your question. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.