Jump to content
Sign in to follow this  
Frantech

Error while detecting libraries included - Blink.ino.cpp

Recommended Posts

I am a first time user running Energia 1.7.7E21 on a Windows 7 machine. (Fresh install).

My board is an EX-TM4C123GXL. (Tivia C Series Launchpad)

 

The Problem (1 of 2)

While trying to run the Blink example program I get the error "Error while detecting libraries included by..." The full message is given below.

I have searched, but have not been able to locate information on where the includes should be. Switching to verbose output has provided more info but I'm not quite sure what I am looking for.

The code has this as it's first line (this line does not show up in the IDE):

#include <Arduino.h>

I have tried copying Arduino.h from another location into ... Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system/inc  but this did not resolve the issue.

I suspect that there may be something wrong with my install but cannot spot it.

Any help would be much appreciated.

 

The full messages returned were as follows:

Energia: 1.8.7E21 (Windows 7), Board: "LaunchPad (Tiva C) w/ tm4c123 (80MHz)"

C:\Program Files (x86)\energia-1.8.7E21\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\energia-1.8.7E21\hardware -hardware C:\Users\Frank\AppData\Local\Energia15\packages -tools C:\Program Files (x86)\energia-1.8.7E21\tools-builder -tools C:\Program Files (x86)\energia-1.8.7E21\hardware\tools\msp430 -tools C:\Users\Frank\AppData\Local\Energia15\packages -built-in-libraries C:\Program Files (x86)\energia-1.8.7E21\libraries -libraries C:\Users\Frank\Documents\Energia\libraries -fqbn=energia:tivac:EK-TM4C123GXL -ide-version=10807 -build-path C:\Users\Frank\AppData\Local\Temp\arduino_build_567315 -warnings=none -build-cache C:\Users\Frank\AppData\Local\Temp\arduino_cache_167371 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.arm-none-eabi-gcc-6.3.1-20170620.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.dslite.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\dslite\7.2.0.2096 -prefs=runtime.tools.dslite-7.2.0.2096.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\dslite\7.2.0.2096 -verbose C:\Program Files (x86)\energia-1.8.7E21\examples\01.Basics\Blink\Blink.ino
C:\Program Files (x86)\energia-1.8.7E21\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\energia-1.8.7E21\hardware -hardware C:\Users\Frank\AppData\Local\Energia15\packages -tools C:\Program Files (x86)\energia-1.8.7E21\tools-builder -tools C:\Program Files (x86)\energia-1.8.7E21\hardware\tools\msp430 -tools C:\Users\Frank\AppData\Local\Energia15\packages -built-in-libraries C:\Program Files (x86)\energia-1.8.7E21\libraries -libraries C:\Users\Frank\Documents\Energia\libraries -fqbn=energia:tivac:EK-TM4C123GXL -ide-version=10807 -build-path C:\Users\Frank\AppData\Local\Temp\arduino_build_567315 -warnings=none -build-cache C:\Users\Frank\AppData\Local\Temp\arduino_cache_167371 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.arm-none-eabi-gcc-6.3.1-20170620.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.dslite.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\dslite\7.2.0.2096 -prefs=runtime.tools.dslite-7.2.0.2096.path=C:\Users\Frank\AppData\Local\Energia15\packages\energia\tools\dslite\7.2.0.2096 -verbose C:\Program Files (x86)\energia-1.8.7E21\examples\01.Basics\Blink\Blink.ino
Using board 'EK-TM4C123GXL' from platform in folder: C:\Users\Frank\AppData\Local\Energia15\packages\energia\hardware\tivac\1.0.3
Using core 'tivac' from platform in folder: C:\Users\Frank\AppData\Local\Energia15\packages\energia\hardware\tivac\1.0.3
Detecting libraries used...
"C:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -Dprintf=iprintf -w -x c++ -E -CC -mmcu=cortex-m4 -DF_CPU=80000000L -DARDUINO=10807 -DENERGIA=10807 -DENERGIA_EK_TM4C123GXL -DENERGIA_ARCH_TIVAC "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\variants\\EK-TM4C123GXL" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system/driverlib" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system/inc" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\cores\\tivac" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\variants\\EK-TM4C123GXL" "C:\\Users\\Frank\\AppData\\Local\\Temp\\arduino_build_567315\\sketch\\Blink.ino.cpp" -o nul
Error while detecting libraries included by C:\Users\Frank\AppData\Local\Temp\arduino_build_567315\sketch\Blink.ino.cpp
Generating function prototypes...
"C:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -Dprintf=iprintf -w -x c++ -E -CC -mmcu=cortex-m4 -DF_CPU=80000000L -DARDUINO=10807 -DENERGIA=10807 -DENERGIA_EK_TM4C123GXL -DENERGIA_ARCH_TIVAC "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\variants\\EK-TM4C123GXL" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system/driverlib" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system/inc" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\cores\\tivac" "-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\variants\\EK-TM4C123GXL" "C:\\Users\\Frank\\AppData\\Local\\Temp\\arduino_build_567315\\sketch\\Blink.ino.cpp" -o "C:\\Users\\Frank\\AppData\\Local\\Temp\\arduino_build_567315\\preproc\\ctags_target_for_gcc_minus_e.cpp"
arm-none-eabi-g++: error: unrecognized command line option '-mmcu=cortex-m4'; did you mean '-mcpu=cortex-m4'?

exit status 1
Error compiling for board LaunchPad (Tiva C) w/ tm4c123 (80MHz).

 

Problem 2  - Unrecognized command line option -mmcu.

This appears to be a typo. The preferences.txt file found at File -> Preferences does not have an entry that matches. Any help on where to find this setting would be appreciated.

Thanks in advance
 

Share this post


Link to post
Share on other sites

Thanks for the reply but the compiler arm-none-eabi-g++ has this message in the output

"-IC:\\Users\\Frank\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\cores\\tivac" 

which points to this file Arduino.h which contains...

// Stub for Arduino header file - For added compatibility with existing arduino libraries
// Include Energia instead
#include "Energia.h" 

 

So I guess that Energia.h is being found. (?)

Up until now, I have expected that the problem was in finding Arduino.h, but now I'm thinking that it could be something to do with one of the header files included by Energia.h. (I assume that the nested includes all work).

Does anyone have any tips on how to figure exactly which include/s are being used or not please? 

Share this post


Link to post
Share on other sites

An update. 

I have been able to able to run the pre-compile step outside of the IDE by copying the IDE output message (Command actually) as it appears after "Generating function prototypes...". 

I put this into a .bat file substituting it for <here> in the example below:

echo off
cmd /c "<here>"

So I could correct (I think) the compiler option and then run it to create the output file called...

"C:\Users\Frank\AppData\Local\Temp\arduino_build_798647\preproc\ctags_target_for_gcc_minus_e.cpp".

So that is progress of sorts. Only the file is over 12,000 lines referencing hundreds of other files. It includes lines like:

# 202 "c:\\users\\frank\\appdata\\local\\energia15\\packages\\energia\\hardware\\tivac\\1.0.3\\system\\driverlib\\adc.h"

followed by the expansion/inclusion of that line.

Since the pre-compile step ran OK to completion, as far as i can tell, and the only change I made was to the compiler option (from  -mmcu=cortex-m4 to --mcpu=cortex-m4) then I think the message...

Error while detecting libraries included by C:\Users\Frank\AppData\Local\Temp\arduino_build_798647\sketch\Blink.ino.cpp

is a red herring.

So is it possible for me to edit the compiler option so that the IDE can use it? ...and if so where could I find it? I have looked in the IDE preferences.txt file but I have no idea where it would be.

Any help would be welcome...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...