Druzyek 36 Posted September 27, 2018 A few years ago a lot of people on the forum were playing with the 96x68 Nokia 1202 LCDs. Did any of you try to run them at less than 3.3v? I would like to try powering one with a CR2032, so I would plan on giving it about 2.8v. The datasheet for the ste2007 says it works down to 2.4v but I would be curious to know if this screen can do that. Also, if anyone has measured the current consumption, that would be good to know too. I read somewhere that it is around 0.2mA. Share this post Link to post Share on other sites
