bluehash 1,581 Posted December 6, 2011 Author Share Posted December 6, 2011 New boards came in. Passed smoke test. This version has two input switches and has support for USCI and USI hardware, selectable via solder jumpers. cubeberg, RobG, bmeengineer and 1 other 4 Quote Link to post Share on other sites
mctouch 5 Posted December 28, 2011 Share Posted December 28, 2011 Have the new OLED Booster Packs been released in the store? I have been checking daily but it says no stock. Thanks Quote Link to post Share on other sites
bluehash 1,581 Posted December 28, 2011 Author Share Posted December 28, 2011 Yes. Almost: viewtopic.php?f=30&t=2041&p=14938#p14922 Quote Link to post Share on other sites
pfactorial 7 Posted January 10, 2012 Share Posted January 10, 2012 Just asking, what display is this? Quote Link to post Share on other sites
mctouch 5 Posted January 10, 2012 Share Posted January 10, 2012 Google UG-2864HSWEG01, I believe it is the same as the one used in the Adafruit SSD1306 breakout. Quote Link to post Share on other sites
bluehash 1,581 Posted January 10, 2012 Author Share Posted January 10, 2012 What mctouch said. Sorry guys. This is almost done. This has been the most hectic New Years.. in a car accident, go on a reduced vacation, come back and fall sick for a week. I'm almost back to normal now. MA got snow flakes today :thumbup: Quote Link to post Share on other sites
bluehash 1,581 Posted January 14, 2012 Author Share Posted January 14, 2012 Just finished the new firmware for the OLED Booster pack GeekDoc, SugarAddict and zeke 3 Quote Link to post Share on other sites
zeke 693 Posted January 14, 2012 Share Posted January 14, 2012 Nice work! Quote Link to post Share on other sites
bluehash 1,581 Posted January 16, 2012 Author Share Posted January 16, 2012 Ok guys. Just to let you know that the boards are now available. There are 20 in stock. Just want to let you guys know before I put it on the Blog tomorrow and give you a chance before it goes out of stock. The store lost all the reminder emails because of a bad plugin. I have a couple of the older revision boards. The only difference between the two are the two pushbuttons and the breakout jumper from the OLED. turd 1 Quote Link to post Share on other sites
GeekDoc 226 Posted January 16, 2012 Share Posted January 16, 2012 Thanks for the heads-up #! I think I got the first two! Quote Link to post Share on other sites
turd 31 Posted January 17, 2012 Share Posted January 17, 2012 I have a couple of the older revision boards. The only difference between the two are the two pushbuttons and the breakout jumper from the OLED. Will these board work with the screens with the yellow stripe across the top? Do they have the same pin-outs? Quote Link to post Share on other sites
bluehash 1,581 Posted January 17, 2012 Author Share Posted January 17, 2012 Yes, as long as it has the ssd1306 controller. Thanks for the heads-up #! I think I got the first two! Thanks! ships tomorrow:) turd 1 Quote Link to post Share on other sites
GeekDoc 226 Posted January 22, 2012 Share Posted January 22, 2012 Got mine Friday. They look great! Can't wait to try them out. Quote Link to post Share on other sites
mctouch 5 Posted January 26, 2012 Share Posted January 26, 2012 Hi, Having trouble getting anything to display on the screen. I installed the msp2452 from my capacitive touch booster pack in my launchpad and ran the Rev R01_02 code on it. It runs in the debugger an I can see it setting the USI stuff. I do have the crystal installed but it looks like it uses the DCO. There are 4 warnings on compile like that the project was setup for the 3.3.2 compiler and I am using 4.0.0 but this shouldn't be an issue. Other warnings are, Possible assignment in condition 'c = *format++', Statement has no effect '*s++' and Unused eclaration of variable 'column'. I have two of the revison 2 OLED Booster Packs and neither works. Any suggestions? mctouch Quote Link to post Share on other sites
bluehash 1,581 Posted January 26, 2012 Author Share Posted January 26, 2012 Did you orient it correctly? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.