Jump to content

Problems with Energia on Mac

Recommended Posts

Hello friends,
I have a problem with installing sdk Energia on mac. After doing the installation I tried to run an example and gave me the following error...

When I try to select a usb port, it does not show any available

Screen Shot 2018-05-29 at 09.32.03.png

Screen Shot 2018-05-29 at 09.34.17.png

Link to post
Share on other sites

You should not need any drivers for the programming part. Couple questions:

  • Is the PWR LED on when you have it plugged in?
  • Which version of macOS are you running?
  • Are the VCC/TEST/RST jumpers properly installed?
  • Which version of the MSP430 core do you have installed? Make sure you update to the latest (1.0.3) through the board manager (Tools->Board->Boards Manager...)

For the Serial part to work you need a driver which can be found here: http://energia.nu/guide/guide_macosx/. The drivers are under the title: "MSP-EXP430G2 and MSP-EXP430FR5739 LaunchPad".

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...