Jump to content
43oh

DMA Block Transfer transfers single word


Recommended Posts

My Setup: Using a MSP430FR5994 device connected over USB to MSPDebug interface. Implemented DMA transfers using TI's interface found in the driverlib source.

Two questions:

1. Is DMA disabled when I am connected to MSPDebug? If so why can I see single transfers between memory locations.

2. When I try to do a block transfer I only see a single word being transferred. Thoughts on why that would be?

Here is some code.

DMA_disableTransferDuringReadModifyWrite();
dma0Config.channelSelect = DMA_CHANNEL_1;
dma0Config.transferModeSelect = DMA_TRANSFER_BLOCK; 
// CONFIG_SAMPLE_SIZE = 32
dma0Config.transferSize = CONFIG_SAMPLE_SIZE;
dma0Config.transferUnitSelect = DMA_SIZE_SRCWORD_DSTWORD;
volatile unsigned int a[CONFIG_SAMPLE_SIZE] = {0};
DMA_init(&dma0Config);

DMA_setSrcAddress(DMA_CHANNEL_1,
                 (uint32_t) (input),
                 DMA_DIRECTION_UNCHANGED);

DMA_setDstAddress(DMA_CHANNEL_1,
                 (uint32_t) (a),
                 DMA_DIRECTION_UNCHANGED);
DMA_enableInterrupt(DMA_CHANNEL_1);
DMA_enableTransfers(DMA_CHANNEL_1);
DMA_startTransfer(DMA_CHANNEL_1);

Any help would be greatly appreciated. Thanks.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...