jazz 209 Posted March 5, 2018 Share Posted March 5, 2018 We are on Energia topic, so I guess that if you want to use Energia for developement, there is limited number of boards or MSP430 devices with pin mapping, by default supported by Energia (MSP430G2553, MSP430F5529, MSP430FR4133, MSP430FR5739, MSP430FR5969, MSP430FR6989). All FRAM devices are with 20-bit CPU Xv2, same as 5xx/6xx flash family, but they are limited by FRAM wait states. However, it is easier to write to FRAM (same as RAM), than to flash, during runtime. For TI, flash 2xx/5xx/6xx family is finished story, and today they are pushing FRAM family. eZ-FET on G2 LP is limited with not updatable firmware and to some of 2xx SBW target, with 9600 bps USB-UART bridge. New LP's are with updatable eZ-FET Lite on board (open software and hardware) that can program all TI MSP430 SBW devices, 115200 bps USB-UART bridge and Energy trace. I guess that you can develop your project on Energia with G2 LP (that you already have), and than later (if there is need for this) port it to some other device. Quote Link to post Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.