osmanfish 0 Posted February 28, 2017 Share Posted February 28, 2017 Hi everyone!! first sorry if my english isn't clear, Well I have problems to uploadig my sketch to my msp430g2 rev1.5 , sometimes it works the first time but latter its impossible to uploading more sketches . I am using windows 10. Attached an image with the trouble message. Greetings from M Quote Link to post Share on other sites
osmanfish 0 Posted February 28, 2017 Author Share Posted February 28, 2017 @osmanfish Quote Link to post Share on other sites
Fmilburn 446 Posted February 28, 2017 Share Posted February 28, 2017 Hi @@osmanfish and welcome to 43oh, Irritating isn't it? It can be caused by several things. It can happen with the MSP430G2 and Energia if you are using serial print and close the serial monitor down while the sketch is printing. This does not seem to happen with other LaunchPads. Try unplugging the LaunchPad at the computer and then plug it back in. You may have to try uploading one or more times to get it working again. Also, avoid shutting down the serial window. Flash (upload) the target chip without shutting the serial monitor. If this does not seem to be your problem then google "Could not find MSP-FET430UIF on specified COM port (error = 57)" and you will find a number of other possible causes. Look on the TI e2e site. bluehash, NurseBob and energia 3 Quote Link to post Share on other sites
brelliott18 2 Posted March 24, 2017 Share Posted March 24, 2017 I've noticed the same problem. It's intermittent which makes it even more annoying. WINDOWS 10 is a disaster in other areas as well eg old Kindle software. I only got WINDOWS 10 because my Windows 7 machine decided to load itself with Windows 10 whilst the machine was unattended. Luckily I still have another system with Windows 7. I also have an XP system - Why this Operating system needed changing I do not know - Oh , yes I do - MONEY . Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.