Search the Community
Showing results for tags 'simplelink'.
Found 1 result
Hi, I am currently working on a code in Energia that will allow me to upload and send a binary file wirelessly from a client site to the CC3200. So far, the code has successfully accomplished the following: -the board establishes a Wi-Fi network -commands from a laptop can interact with the board (the Energia Simple Wi-Fi Server example (LED ON/OFF) code was tested to ensure this was working) -a 9 byte binary file is sent through Wi-Fi to the board's volatile memory, saved from volatile memory into an on-baord flash memory file, and confirmed by sending it back to the laptop through a serial connection The code is eventually supposed to receive a larger binary file (we hope around 500 KB) that will represent points on a sinusoidal curve. This file will then be sent to the Audio Booster Pack board to play the audio file. I created a flash file which was opened, and written to through a buffer array containing the binary file contents. This method was successful for a 9 byte file, but I learned that a larger 500 KB file cannot be stored in a buffer array so easily. I think this is because of a lack of RAM space on the board. How can I implement a code in Energia in order save this larger binary file to the flash memory? Is the buffer array approach a good method? Latency isn't really an issue, as long as we can fit the whole file on the board, and then play it after. Thanks, any support is greatly appreciated!