Search the Community
Showing results for tags 'remote controled outlet'.
Found 1 result
The goal of this project is to utilize an MSP430 to allow existing remote-controlled outlets to by controlled over Wi-Fi. As purchased, the outlets can be controlled with a provided remote control which uses 434 MHz radio signals. By programing the MSP430 to replicate the signals from this remote and hosting a web page with controls on the MSP430, the outlets can be able to be controlled from anywhere on the same Wi-Fi network. The completed project provides a web page that can both control each of three outlets individually or all three at once. This is done using an MSP430 as a controller with a 434MHz transmitter sending commands to the outlets, and an ESP 8266 Wi-Fi module connecting to the network. A schematic of the completed project is shown in Fig. 1, and a photo of the completed project is shown in Fig. 2. With this set up the outlets can be reliably controlled from anywhere on the same Wi-Fi network. The components required for this project, along with the equipment necessary are listed below. All the components can be purchased for less than $30. I was able to write an interface to control the outlets, as well as serve a webpage to control the outlets. This was the final project for my Embedded Systems class at John Brown University. more details are avalible in the attached file. Parts list: · TI MSP430G2553 Launchpad · 434 MHz RF transmitter https://www.sparkfun.com/products/10534 · ESP8266 wifi module · Syantek Remote Controlled Outlets https://www.amazon.com/Syantek-Electrical-Household-Appliances-Expandable/dp/B07JF93XB5 · Breadboard · Jumper cables · USB power supply Equipment · 434 MHz RF receiver https://www.sparkfun.com/products/10532 · Digilent Analog Discovery Module · Code Composer Studio · Serial to USB converter Light_Switch_Final_Report.docx