Search the Community
Showing results for tags 'msp430f2013'.
Found 2 results
Hi, I wrote an article (in Portuguese) about how to use the SD16 ADC of MSP43F2013, and to show one practical application I transformed the MSP430F2013 in an I2C 16-bit ADC, similar to ADS1115. In the example, I read the data using one Arduino Nano. Comparing the conversion of SD16 and ADS1115: More details about the project can be found in my Github: https://github.com/agaelema/msp430f20x3_as_i2c_16bit_adc The project is open to further improvements/optimizations and functions.
I like the boosterPack concept, but for my current project I needed access to all the pins on an F5529 as well as an F2013. So, I constructed a couple of boards to plug into an MSP-TS430PN80USB in a boosterpack fashion. As is probably obvious, I missed a couple of traces (GND lines), for which I had to add the little green wires. The top board has all my sensors, and the bottom is basically battery management and a sx1509 port expander to manage a number of LEDs. I don't actually need the extra ports, but I wanted the sx1509's built-in LED "breathe" capability. Saves coding... -lazy programmer I was a happy camper when I fired-up the system and was able to access and program both MCUs. I've found that I can choose between running two instances of IAR (or CCS) and debug both micros simulaneously. Handy for the comms and interrupt handing. So, let the fun begin... BTW - the TFT LCD is from buydisplay.com - 2.8" TFT with Cap touch (about $15.00 U.S.). It's using the ILI9341 controller for the LCD and the FT6206 controller for the cap touch. For proof of concept I was able to use the Adafruit sketches to connect with both, and the edits were limited to pin assignments, if I remember correctly.