Search the Community
Showing results for tags 'hi power'.
Found 1 result
Hi, I've done a little searching and will continue to search more but here is what I posted on TI's website E2E. I have three LED projects in mind (at least 3). Project one. Drive multiple led arrays in alternating flashing and possibly solid burn patterns (3-4 hi powered 1 watt led per array ) Solid colors (basic end result amber warning strobes for plowing vehicle) Possibly higher wattage or more led for a flood light head. Would like dimming possible Project two similar concept but high powered rgb led's going to be used for party lights Project three similar to this product http://www.adafruit.com/products/306 It uses some Chinese chip LPD8806 and an "SPI" like protocol to drive each RGB led . The page also mentions shift registers which I believe are on the chip to allow each led to be individually addressable. I'd like to build a matrix but getting individual leds and making my own board instead of a strip. I still want leds individual addressable and fully color controllable. The whole stripe only uses 4 pins, power, gnd, data and clock. I'd also like to see about using higher power ones. I've been trying to read the data sheets but I'm not sure what would be the best drivers to use. I'd also prefer this was easy to implement with the least extra components as possible and for easy for someone knew to making PCB's and soldering anything smd. Rich