Search the Community
Showing results for tags '4d systems'.
Found 3 results
Here are two BoosterPacks from 4D Systems, 96 x 64 pixels OLED and 128 x 128 pixels TFT. They both contain powerful GOLDELOX graphics processor, 5 switches, and a microSD socket. GOLDELOX and LaunchPad communicate using async serial interface. The memory card can be used to store images, icons, video clips and data. Work on the library is in progress.
I needed a case designed to hold the BeagleBone Black and 4D Systems 4.3" LCD Touchscreen. It is designed to sit on a desk and have the screen angled towards the user. This was one of the prototypes. I went with a different design than this, so I figured I would release this one to the public if anyone wants it. It was designed by reddit user /u/ubermeisters, a moderator on /r/3dprinting. He is a talented designer, and charges a very reasonable price. If you need something designed, I can highly recommend him. Anyway, here are some renders of the design: BeagleBone Black & 4D Systems LCD Just some things you need to be aware of. This case requires a low profile power adapter, and a small wifi adapter. The case is held together by press-in screw inserts, which you will probably have to glue in. You'll then need screws for it. Just an FYI, part of the reason I didn't go with this design is because I could only find these inserts in bulk quantities. Yardley Press-in Screw Inserts M3x.5x10mm Screws The power cord will fit through the hole in the back. You can have it printed on MakerXYZ for ~$30-$50 depending on the person you use, and if they're local or not. Anyway, here are the files if you want them: BeagleBone Black & 4D LCD Case