Search the Community
Showing results for tags 'C2000'.
Found 12 results
-
//########################################################################### #include "DSP2833x_Device.h" // external function prototypes extern void InitSysCtrl(void); extern void InitCpuTimers(void); // Prototype statements for functions found within this file. void Gpio_select(void); void Setup_HS1(void); void Setup_HS2(void); void Setup_HS3(void); void Setup_HS4(void); void Setup_HS5(void); void Setup_HS6(void); // Global Variables int Hall_1_result, Hall_2_result, Hall_3_result, Hall_State, x=0 , P_State=0; #define Hall_1 GpioDataRegs.GPADAT.bit.GPIO24 #define Hall_2 GpioDataRegs.GPA
-
Dear Sir/ Madam, First of all, my sincere thanks to all energia team members for their continuous effort to develop such wonderful IDE for ti, hope it will go in long run. I was trying to use C2000 Piccolo F28027 and F28027F LaunchPads and followed the instructions as mentioned below, c2000 folder is successfully included in destination directory as mentioned, but now when i am opening the energia, this C2000 board in not appearing, please see below, please help me to sort out the issue -
Hello, I'm really struggeling to implement the TI instaspin FOC for a C2000 TMS320F28027F launchpad, as a stand alone deployment in an embedden system. I was wondering if it is possible to do this with Energia? kind regards Joppe Baalhuis
-
Hi Everybody; I am newbei about C200O programming with CodeComposerStudio. I tried simple code which is led blinking. But I want to use button. And I can't run it. Anyway I attached code and screenshot. What's wrong my code? GPIO_setMode(myGpio, GPIO_Number_12, GPIO_12_Mode_GeneralPurpose); GPIO_setDirection(myGpio, GPIO_Number_12, GPIO_Direction_Input ); int state = GPIO_getData(myGpio, GPIO_Number_12); GPIO_setLow(myGpio, GPIO_Number_0); GPIO_setLow(myGpio, GPIO_Number_1); GPIO_setLow(myGpio, GPIO_Number_2); GPIO_setLow(myGpio, GPIO_Number_3); while(1) { if(
-
Hi Guys; Recently time, I am using energia to programming microcontrollers. Especially, G2553 and TivaC. But I have some tackles when I change the launchpad which is C2000 F28027. I read all messages in this forum. I cannot manage with problem. First of all : I remove 0101E0016 version, because it has a cpp code problem for C2000. Secondly: I can compile with 0101E0014 version. But no Upload. Always same fault " JAVA Problem." All stiationm can be show the below images.
-
I am starting with C2000 launchPad LAUNCHXL-F28069M, try to configure PWM. When I use analogFrequency(), it is black(not working). I checked the wiring_analog.c and found this function is empty. The problem now is I don't know how to write analogFrequency() by myself. Did someone already fulfill the function and would like to give some advice? Thanks.
-
Hello everyone! I have just bought a C2000 Piccolo LaunchPad Evaluation Kit, de LAUNCHXL - F28027F. I have also just started learning to program in Energia, and I am following the tutorials in the guide section (they are very useful if someone is a beginer). While I was doing the first tutorial (Blinking LED), it appeared this error: "Put C2000 LaunchPad switches (S1) ON-OFF-OFF (UP-DOWN-DOWN), ensure the back channel serial connection is enabled, and press the reset button. If the download fails try a baud rate below 38400." I put the switches as it says, and I also decreased t
-
Hello, What is the flag for a C2000, like in below __MSP430F5529__ or __TM4C123GH6PM__ is used for different launchpads. what do we use for c2000. For the C2000 board is there any area for storing user settings, like we did with MspFlash.h or with EEPROM.h ? I peeked inside the hardware dirs of energia, but could not find Eeprom.h under the c2000 section. And recomendations/ideas and help greatly appreciated. #if defined(__MSP430G2553__) || defined(__MSP430F5529__) || defined() #include "MspFlash.h" void calLibErase(byte device) .. void calLibWrite(byte device, CA
-
http://www.ti.com/tool/launchxl-f28069m BoosterPack XL form factor. $24.99 USD Features C2000 Piccolo F28069M MCU with InstaSPIN
-
I bought C2000 a 1 week ago. I started working today, have been working from last 6 hours. Problem is when ever I flash the program into the C2000 it gets uploaded but whenever I press reset button then program gets lost. All this is happening in Energia IDE. Correct me if I am doing something wrong. Reply asap Thank You
-
Hello everyone! Just wanted to say thank you for all the support and guidance everyone in this forum has towards beginners, you guys have been of so much help!! Now, here is a question: I am trying to interface 2 microcontrollers, a MSP430F5529 with a C2000 F28335 I was told the MSP doesnt support CAN, I would have to convert SPI to CAN and go from there. What do you guys suggest? I have never successfully used communication protocols. Any good examples of send and receive out there? Thanks in advance!
-
In at least two places the Energia documentation claims that LaunchPad pins can source or sink up to 40 mA. Is that true of all (or any) of the launchpads supported by Energia? (i.e., Stellaris/Tiva, Tiva Connected, MSP430, Fraunchpad, C2000, CC3200) For the Stellaris launchpad, the documentation for the LM4F120 gives drive strength options of 2, 4, or 8 mA, and says up to 4 pins can sink 18 mA. So where does the 40mA come from (or go to)? Yet energia.nu says: "LaunchPad pins can source (provide positive current) or sink (provide negative current) up to 40 mA (milliamps) of current to
- 3 replies
-
- 1
-
-
- Energia
- documentation
- (and 5 more)
