Jump to content
43oh

JasonL

Members
  • Content Count

    2
  • Joined

  • Last visited

Everything posted by JasonL

  1. Ok, just to be sure I understand what I'm supposed to do. So, I can ignore that for the launchpad they used the pin numbers for the headers, instead of the pin out on the 80 pin chip on the board, and replace it with the pin out of the 48 pin package that I used on my custom board. At line 45, I would change to SS0 = 16 because that's the pin that P4.0 is on the 48 pin package (if I had used that as the EUSCI_B0 chip select pin) line 216, I'll shorten the whole section to be 48 long, and match the pins to their function. So, whatever line is pin 16 will be: static const uin
  2. I've been trying to get an Energia sketch for the MSP430FR5994 LaunchPad Development Kit to work with a custom board I made. I used a different MSP430FR5994 package than the one on the launchpad so I need to change the pins used. It sounds like typically the way to do that is to create a new board variant with its own pins_energia.h file with the pins changed. But, it looks like the FR5994 version of the file doesn't map the pins to the actual chip, but to the booster pack headers on the development kit, implying that those are mapped to the actual chip pins somewhere else, but I can't find wh
×
×
  • Create New...