Jump to content

lef2020

Members
  • Content Count

    4
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by lef2020

  1. I'v solved this issue installing previous version of Energia. It's works. Release version 1.8.7E21 (10/17/2018) upload correctly.
  2. Release version 1.8.7E21 (10/17/2018) upload correctly.
  3. I have the same problem. On Linux, lunchpad MSP430G2, MCU 430G2553 Here error message: === Energia: 1.8.11E23 (Linux), Плата:"MSP-EXP430G2 w/ MSP430G2553" Скетч использует 380 байт (2%) памяти устройства. Всего доступно 16384 байт. Глобальные переменные используют 20 байт (3%) динамической памяти, оставляя 492 байт для локальных переменных. Максимум: 512 байт. MSPDebug version 0.24 - debugging tool for MSP430 MCUs Copyright (C) 2009-2016 Daniel Beer <dlbeer@gmail.com> This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Chip info database from MSP430.dll v3.3.1.4 Copyright (C) 2013 TI, Inc. Trying to open interface 1 on 115 rf2500: warning: can't detach kernel driver: No data available Initializing FET... FET protocol version is 30394216 Set Vcc: 3000 mV Configured for Spy-Bi-Wire Sending reset... Device ID: 0x2553 Code start address: 0xc000 Code size : 16384 byte = 16 kb RAM start address: 0x200 RAM end address: 0x3ff RAM size : 512 byte = 0 kb Device: MSP430G2xx3 Number of breakpoints: 2 fet: FET returned NAK warning: device does not support power profiling Chip ID data: prog: '/tmp/arduino_build_265623/sketch_oct08a.ino.hex': No such file or directory ver_id: 5325 ver_sub_id: 0000 revision: 00 fab: 60 self: 0000 config: 00 Device: MSP430G2xx3 Произошла ошибка при загрузке скетча Этот отчёт будет иметь больше информации с включенной опцией Файл -> Настройки -> "Показать подробный вывод во время компиляции" ==================
×
×
  • Create New...