Jump to content
43oh

CarlosMRDG

Members
  • Content Count

    1
  • Joined

  • Last visited

Posts posted by CarlosMRDG

  1. Hi! 

    I have used the Easylink examples for Energia and I was able to send data from a Launchpad CC1310 to another at 50kbps. But I need to increase the baud rate to 200kbps or 500kbps. I have replaced EasyLink_Phy_50kbps2gfsk to EasyLink_Phy_200kbps2gfsk in the following files: 

    • Easylink/src/Easylink.h line 42
    • Easylink/src/easylink/Easylink.h line 223 and 232
    • Easylink/src/easylink/Easylink.c line 159 and 614
    • In Example EasylinkRX and EasylinkTx line 22 

    I have also replaced the configuration in smart_settings.c and smart_settings.h with the configuration generate by smartRF Studio (see configuration below). It compiles. But the communication does not work.

    What else must be changed? Can you provide a project or a library that is already working at this baud rate? 

    I send you attached my project. That way you might find easily the error. I have spent hours at this and have no clue what's wrong. I hope you can help me.

     

    //*********************************************************************************

    // Parameter summary

    // Address: 0
    // Address0: 0xAA
    // Address1: 0xBB
    // Frequency: 868.00000 MHz
    // Data Format: Serial mode disable
    // Deviation: 70.000 kHz
    // pktLen: 30
    // 802.15.4g Mode: 0
    // Select bit order to transmit PSDU octets:: 1
    // Packet Length Config: Variable
    // Max Packet Length: 128
    // Packet Length: 20
    // Packet Data: 255
    // RX Filter BW: 311 kHz
    // Symbol Rate: 200.00000 kBaud
    // Sync Word Length: 32 Bits
    // TX Power: 14 dBm (requires define CCFG_FORCE_VDDR_HH = 1 in ccfg.c, see CC13xx/CC26xx Technical Reference Manual)
    // Whitening: No whitening 

    CodeComposer.zip

×
×
  • Create New...