Jump to content


  • Content Count

  • Joined

  • Last visited

  1. Hi! I have used the Easylink examples for Energia and I was able to send data from a Launchpad CC1310 to another at 50kbps. But I need to increase the baud rate to 200kbps or 500kbps. I have replaced EasyLink_Phy_50kbps2gfsk to EasyLink_Phy_200kbps2gfsk in the following files: Easylink/src/Easylink.h line 42 Easylink/src/easylink/Easylink.h line 223 and 232 Easylink/src/easylink/Easylink.c line 159 and 614 In Example EasylinkRX and EasylinkTx line 22 I have also replaced the configuration in smart_settings.c and smart_settings.h with the configuration generate by smartRF Studio (see configuration below). It compiles. But the communication does not work. What else must be changed? Can you provide a project or a library that is already working at this baud rate? I send you attached my project. That way you might find easily the error. I have spent hours at this and have no clue what's wrong. I hope you can help me. //********************************************************************************* // Parameter summary // Address: 0 // Address0: 0xAA // Address1: 0xBB // Frequency: 868.00000 MHz // Data Format: Serial mode disable // Deviation: 70.000 kHz // pktLen: 30 // 802.15.4g Mode: 0 // Select bit order to transmit PSDU octets:: 1 // Packet Length Config: Variable // Max Packet Length: 128 // Packet Length: 20 // Packet Data: 255 // RX Filter BW: 311 kHz // Symbol Rate: 200.00000 kBaud // Sync Word Length: 32 Bits // TX Power: 14 dBm (requires define CCFG_FORCE_VDDR_HH = 1 in ccfg.c, see CC13xx/CC26xx Technical Reference Manual) // Whitening: No whitening CodeComposer.zip
  • Create New...