Jump to content

LoveShadow

Members
  • Content Count

    4
  • Joined

  • Last visited

  1. I've tried with this one as well, and it did not work. https://www.electronicwings.com/ti-launchpad/gps-module-interfacing-with-msp-exp430g2-ti-launchpad
  2. Sorry, thought it would be enough what is in tags. http://www.ti.com/tool/MSP-EXP430G2ET this particular one , MSP430G2553 LaunchPad Development Kit Rev 2.0 IDE used : Energia IDE 1.8.7E21 OS used : Windows 10
  3. I've got the same issue, and it has been solved reverting the jumpers on the RX and TX pins. From vertically to horizontally like in this image. Hope it helps ^^
  4. Hello! I've got a problem when I want to show the output on serial monitor of a GPS. When I put a basic example (fade example) and the TX of the GPS on the TX of MSP430 (P1_2 pin) the output shows good, without any problem. The baud rate was the stock one (9600). When I try to make the same thing on other pins (I've choosed RX of GPS to P1_3 and TX of GPS to P1_4) a scrambled output takes place on the serial monitor and I don't really know what to do. I'll attach the code, maybe it's a code issue. Thanks in advance! I'm new in this so take me easy please //THE CODE https://pastebin.com/cjFyjHns #include <SoftwareSerial.h> static const int RXPin = P1_4, TXPin = P1_3; static const uint32_t GPSBaud = 9600; // The serial connection to the GPS device SoftwareSerial ss(RXPin, TXPin); void setup() { Serial.begin(115200); ss.begin(GPSBaud); } void loop() { // Output raw GPS data to the serial monitor while (ss.available() > 0){ Serial.write(ss.read()); // delay(10); } }
×
×
  • Create New...