Jump to content

joerg430

Members
  • Content Count

    1
  • Joined

  • Last visited

  1. Hi guys ! I cannot upload the sketch. An error is shown, see log attached. Although I switch the user interface to English, it is still in system language (here German). The message ("Die Syntax ...") says: bad filename syntax. Same thing had been asked here: https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/735035?MSP-EXP430FR5739-MSP-EXP430FR5739-error-uploading-sketch But the answer has never been verified by the original poster. I have installed these drivers 2 times. The error persists even after system reboot. Thanks for any help. Cheers, Joerg Sketch uses 778 bytes (37%) of program storage space. Maximum is 2048 bytes. Global variables use 20 bytes (7%) of dynamic memory, leaving 236 bytes for local variables. Maximum is 256 bytes. MSPDebug version 0.24 - debugging tool for MSP430 MCUs Copyright (C) 2009-2016 Daniel Beer <dlbeer@gmail.com> This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ----------------- NOTE ------------------ Modified version of mspdebug for Energia Do not use standalone ----------------------------------------- Chip info database from MSP430.dll v3.3.1.4 Copyright (C) 2013 TI, Inc. Using new (SLAC460L+) API MSP430_GetNumberOfUsbIfs MSP430_GetNameOfUsbIf Found FET: HID0062:COM5 MSP430_Initialize: HID0062:COM5 Firmware version is 20409001 MSP430_VCC: 3000 mV MSP430_OpenDevice MSP430_GetFoundDevice Device: F20x2_G2x2x_G2x3x (id = 0x0035) 2 breakpoints available MSP430_EEM_Init Chip ID data: ver_id: 01f2 ver_sub_id: 0000 revision: 30 fab: 40 self: 0000 config: 02 prog: 'C:\Users\MYNAME\AppData\Local\Temp\arduino_build_465010/blink.ino.hex': Die Syntax für den Dateinamen, Verzeichnisnamen oder die Datenträgerbezeichnung ist falsch. Device: F20x2_G2x2x_G2x3x MSP430_Run MSP430_Close An error occurred while uploading the sketch
×
×
  • Create New...