Jump to content


  • Content Count

  • Joined

  • Last visited

Posts posted by rzndmn

  1. Hello,

    Uploading a sketch on OSX 10.13.6 will not succeed.
    I have replaced mspdebug with version 0.22 (was 0.24).

    The *.hex file exists and is readable.

    Any thoughts?



    Energia: 1.8.7E20 (Mac OS X), Board: "MSP-EXP430G2 w/ MSP430G2553"


    MSPDebug version 0.22 - debugging tool for MSP430 MCUs

    Trying to open interface 1 on 020
    Initializing FET...
    FET protocol version is 30394216
    Set Vcc: 3000 mV
    Configured for Spy-Bi-Wire
    Sending reset...
    Device ID: 0x2553
      Code start address: 0xc000
      Code size         : 16384 byte = 16 kb
      RAM  start address: 0x200
      RAM  end   address: 0x3ff
      RAM  size         : 512 byte = 0 kb
    Device: MSP430G2xx3
    Number of breakpoints: 2
    fet: FET returned NAK
    warning: device does not support power profiling
    Chip ID data: 25 53
    prog: '/var/folders/c5/s_6mfn7x2_l2fsmqz5tz9qw40000gn/T/arduino_build_853049/sketch_oct03a.ino.hex': No such file or directory
    An error occurred while uploading the sketch




  • Create New...