Jump to content

xeebot

Members
  • Content Count

    37
  • Joined

  • Last visited

  • Days Won

    1

Reputation Activity

  1. Thanks
    xeebot got a reaction from bluehash in [SOLVED] Sending Email To Hosted Server   
    @energia

    Sorry for the delay following up on this - had some family medical issues that I had to be present for.

    If it is okay, I'm posting my version here in case somebody else needs to do the same thing, will save them a few steps

    I basically combined the sketch you linked to with the WPA example - this allowed me to get details about the board (mac, IP) and do basic troubleshooting. Switched the Ethernet client to WiFi and plugged in my own values for SMTP and email addresses.  I put a comment in indicating which lines somebody who wants to use this would need to change.

    My next step is to combine this with the "test" firmware I wrote for my PCB, and, if everything works on the Launchpad, upload the bin using Uniflash. Will let you know how that works out!

    Code from attached Sketch:
     
    //combines the WPA WiFi example with the Arduino "panic email" sketch - uses WiFi client in place of Ethernet - WPA client shows data about your board and connection in serial monitor // //replace the variables on lines 8, 10, 12, 15, 17, 18, 67, 71, 75, 82, and 84 (for your board and your SMTP server) // //If all variables are correct, board connects to router then waits until SW3 is pressed, then sends email. // #include <SPI.h> #include <WiFi.h> WiFiClient client; //the Pin for SW3 on a launchpad int buttonPinSW3 = 3; //your router's SSID char ssid[] = "YourSSID"; //your router's password char password[] = "YourPassword"; boolean statusCheck=false; //your board's mac address byte mac[] = { 0xDA, 0xE5, 0x13, 0x25, 0x47, 0xB8 }; //your SMTP server char server[] = "mail.send.com"; int SMTPport = 25; void setup() { Serial.begin(115200); Serial.print("Attempting to connect to Network named: "); Serial.println(ssid); WiFi.begin(ssid, password); while ( WiFi.status() != WL_CONNECTED) { Serial.print("Attempting to connect to Network named: "); Serial.println(ssid); Serial.println("."); delay(300); } Serial.println("\nYou're connected to the network"); Serial.println("Waiting for an ip address"); while (WiFi.localIP() == INADDR_NONE) { Serial.print("."); delay(300); } Serial.println("\nIP Address obtained"); printCurrentNet(); printWifiData(); pinMode(buttonPinSW3, INPUT); } void loop() { if(digitalRead(buttonPinSW3)==HIGH && statusCheck==false) { if(sendEmail()) Serial.println(F("Email sent")); else Serial.println(F("Email failed")); statusCheck = true; } else if (digitalRead(buttonPinSW3)==LOW) { statusCheck = false; } } byte sendEmail() { byte thisByte = 0; byte respCode; if(client.connect(server,SMTPport)) { Serial.println(F("connected")); } else { Serial.println(F("connection failed")); return 0; } if(!eRcv()) return 0; // change to your public ip client.println(F("helo [173.6.157.102]")); if(!eRcv()) return 0; Serial.println(F("Sending From")); // change to your email address (sender) client.println(F("MAIL From: <sender@send.com>")); if(!eRcv()) return 0; // change to recipient address Serial.println(F("Sending To")); client.println(F("RCPT To: <reader@readme.com>")); if(!eRcv()) return 0; Serial.println(F("Sending DATA")); client.println(F("DATA")); if(!eRcv()) return 0; Serial.println(F("Sending email")); // change to recipient address client.println(F("To: You <reader@readme.com>")); // change to your address client.println(F("From: Me <sender@send.com>")); client.println(F("Subject: Panic Alarm!\r\n")); client.println(F("The panic button was pressed!!!")); client.println(F(".")); if(!eRcv()) return 0; Serial.println(F("Sending QUIT")); client.println(F("QUIT")); if(!eRcv()) return 0; client.stop(); Serial.println(F("disconnected")); return 1; } byte eRcv() { byte respCode; byte thisByte; int loopCount = 0; while(!client.available()) { delay(1); loopCount++; // if nothing received for 10 seconds, timeout if(loopCount > 10000) { client.stop(); Serial.println(F("\r\nTimeout")); return 0; } } respCode = client.peek(); while(client.available()) { thisByte = client.read(); Serial.write(thisByte); } if(respCode >= '4') { efail(); return 0; } return 1; } void efail() { byte thisByte = 0; int loopCount = 0; client.println(F("QUIT")); while(!client.available()) { delay(1); loopCount++; // if nothing received for 10 seconds, timeout if(loopCount > 10000) { client.stop(); Serial.println(F("\r\nTimeout")); return; } } while(client.available()) { thisByte = client.read(); Serial.write(thisByte); } client.stop(); Serial.println(F("disconnected")); } void printWifiData() { // print your WiFi IP address: IPAddress ip = WiFi.localIP(); Serial.print("IP Address: "); Serial.println(ip); Serial.println(ip); byte mac[6]; WiFi.macAddress(mac); Serial.print("MAC address: "); Serial.print(mac[5], HEX); Serial.print(":"); Serial.print(mac[4], HEX); Serial.print(":"); Serial.print(mac[3], HEX); Serial.print(":"); Serial.print(mac[2], HEX); Serial.print(":"); Serial.print(mac[1], HEX); Serial.print(":"); Serial.println(mac[0], HEX); } void printCurrentNet() { Serial.print("SSID: "); Serial.println(WiFi.SSID()); byte bssid[6]; WiFi.BSSID(bssid); Serial.print("BSSID: "); Serial.print(bssid[5], HEX); Serial.print(":"); Serial.print(bssid[4], HEX); Serial.print(":"); Serial.print(bssid[3], HEX); Serial.print(":"); Serial.print(bssid[2], HEX); Serial.print(":"); Serial.print(bssid[1], HEX); Serial.print(":"); Serial.println(bssid[0], HEX); long rssi = WiFi.RSSI(); Serial.print("signal strength (RSSI):"); Serial.println(rssi); byte encryption = WiFi.encryptionType(); Serial.print("Encryption Type:"); Serial.println(encryption, HEX); Serial.println(); }  
    WiFi_Email_Example.ino
  2. Like
    xeebot got a reaction from Fmilburn in [SOLVED] Sending Email To Hosted Server   
    @energia

    Sorry for the delay following up on this - had some family medical issues that I had to be present for.

    If it is okay, I'm posting my version here in case somebody else needs to do the same thing, will save them a few steps

    I basically combined the sketch you linked to with the WPA example - this allowed me to get details about the board (mac, IP) and do basic troubleshooting. Switched the Ethernet client to WiFi and plugged in my own values for SMTP and email addresses.  I put a comment in indicating which lines somebody who wants to use this would need to change.

    My next step is to combine this with the "test" firmware I wrote for my PCB, and, if everything works on the Launchpad, upload the bin using Uniflash. Will let you know how that works out!

    Code from attached Sketch:
     
    //combines the WPA WiFi example with the Arduino "panic email" sketch - uses WiFi client in place of Ethernet - WPA client shows data about your board and connection in serial monitor // //replace the variables on lines 8, 10, 12, 15, 17, 18, 67, 71, 75, 82, and 84 (for your board and your SMTP server) // //If all variables are correct, board connects to router then waits until SW3 is pressed, then sends email. // #include <SPI.h> #include <WiFi.h> WiFiClient client; //the Pin for SW3 on a launchpad int buttonPinSW3 = 3; //your router's SSID char ssid[] = "YourSSID"; //your router's password char password[] = "YourPassword"; boolean statusCheck=false; //your board's mac address byte mac[] = { 0xDA, 0xE5, 0x13, 0x25, 0x47, 0xB8 }; //your SMTP server char server[] = "mail.send.com"; int SMTPport = 25; void setup() { Serial.begin(115200); Serial.print("Attempting to connect to Network named: "); Serial.println(ssid); WiFi.begin(ssid, password); while ( WiFi.status() != WL_CONNECTED) { Serial.print("Attempting to connect to Network named: "); Serial.println(ssid); Serial.println("."); delay(300); } Serial.println("\nYou're connected to the network"); Serial.println("Waiting for an ip address"); while (WiFi.localIP() == INADDR_NONE) { Serial.print("."); delay(300); } Serial.println("\nIP Address obtained"); printCurrentNet(); printWifiData(); pinMode(buttonPinSW3, INPUT); } void loop() { if(digitalRead(buttonPinSW3)==HIGH && statusCheck==false) { if(sendEmail()) Serial.println(F("Email sent")); else Serial.println(F("Email failed")); statusCheck = true; } else if (digitalRead(buttonPinSW3)==LOW) { statusCheck = false; } } byte sendEmail() { byte thisByte = 0; byte respCode; if(client.connect(server,SMTPport)) { Serial.println(F("connected")); } else { Serial.println(F("connection failed")); return 0; } if(!eRcv()) return 0; // change to your public ip client.println(F("helo [173.6.157.102]")); if(!eRcv()) return 0; Serial.println(F("Sending From")); // change to your email address (sender) client.println(F("MAIL From: <sender@send.com>")); if(!eRcv()) return 0; // change to recipient address Serial.println(F("Sending To")); client.println(F("RCPT To: <reader@readme.com>")); if(!eRcv()) return 0; Serial.println(F("Sending DATA")); client.println(F("DATA")); if(!eRcv()) return 0; Serial.println(F("Sending email")); // change to recipient address client.println(F("To: You <reader@readme.com>")); // change to your address client.println(F("From: Me <sender@send.com>")); client.println(F("Subject: Panic Alarm!\r\n")); client.println(F("The panic button was pressed!!!")); client.println(F(".")); if(!eRcv()) return 0; Serial.println(F("Sending QUIT")); client.println(F("QUIT")); if(!eRcv()) return 0; client.stop(); Serial.println(F("disconnected")); return 1; } byte eRcv() { byte respCode; byte thisByte; int loopCount = 0; while(!client.available()) { delay(1); loopCount++; // if nothing received for 10 seconds, timeout if(loopCount > 10000) { client.stop(); Serial.println(F("\r\nTimeout")); return 0; } } respCode = client.peek(); while(client.available()) { thisByte = client.read(); Serial.write(thisByte); } if(respCode >= '4') { efail(); return 0; } return 1; } void efail() { byte thisByte = 0; int loopCount = 0; client.println(F("QUIT")); while(!client.available()) { delay(1); loopCount++; // if nothing received for 10 seconds, timeout if(loopCount > 10000) { client.stop(); Serial.println(F("\r\nTimeout")); return; } } while(client.available()) { thisByte = client.read(); Serial.write(thisByte); } client.stop(); Serial.println(F("disconnected")); } void printWifiData() { // print your WiFi IP address: IPAddress ip = WiFi.localIP(); Serial.print("IP Address: "); Serial.println(ip); Serial.println(ip); byte mac[6]; WiFi.macAddress(mac); Serial.print("MAC address: "); Serial.print(mac[5], HEX); Serial.print(":"); Serial.print(mac[4], HEX); Serial.print(":"); Serial.print(mac[3], HEX); Serial.print(":"); Serial.print(mac[2], HEX); Serial.print(":"); Serial.print(mac[1], HEX); Serial.print(":"); Serial.println(mac[0], HEX); } void printCurrentNet() { Serial.print("SSID: "); Serial.println(WiFi.SSID()); byte bssid[6]; WiFi.BSSID(bssid); Serial.print("BSSID: "); Serial.print(bssid[5], HEX); Serial.print(":"); Serial.print(bssid[4], HEX); Serial.print(":"); Serial.print(bssid[3], HEX); Serial.print(":"); Serial.print(bssid[2], HEX); Serial.print(":"); Serial.print(bssid[1], HEX); Serial.print(":"); Serial.println(bssid[0], HEX); long rssi = WiFi.RSSI(); Serial.print("signal strength (RSSI):"); Serial.println(rssi); byte encryption = WiFi.encryptionType(); Serial.print("Encryption Type:"); Serial.println(encryption, HEX); Serial.println(); }  
    WiFi_Email_Example.ino
  3. Thanks
    xeebot got a reaction from bluehash in {SOLVED] Anybody have a copy of cc3200_drivers_win.zip?   
    Can anyone send me a copy, please? I have the SDK installed, so the board shows properly in Device Manager, but I get a compile error in Energia.

    Prior to this, I did a clean install of Energia on a new install of Windows and when I went to grab the CC3200 drivers, they're not available:
    http://energia.nu/guide/guide_windows/
    The link to http://energia.nu/files/cc3200_drivers_win.zip  shows:
     
    Oops! Our 404 is showing...
    That page can’t be found.
    Nothing was found at this web address. Click your back button, use the menu tabs, or try a search?
     
     
  4. Like
    xeebot got a reaction from bluehash in Is it Better to Change Header or Remap GPIO in my Sketch?   
    I missed this when I answered the Pm yesterday!

    There are 10 GPIOs (1 ADC, 1 PWM, 2 UART)
    GPIO  0    PIN 44    ADC - EN   (voltage measurement)
    GPIO  1    PIN 46    TX (UART)
    GPIO  2    PIN 47    RX (UART)
    GPIO  4    PIN 49    VMEAS_BAT  (voltage measurement)
    GPIO  5    PIN 50    ADC - DRV5053 - omnidirectional Hall sensor
    GPIO 10    PIN 3     PWM - Piezo
    GPIO 12    PIN 9     LED
    GPIO 13    PIN 10    DRV5032 bi-directional Hall sensor 
    GPIO 14    PIN 5     LED
    GPIO 28    PIN 19    LED
    Is that too many to remap an existing board?
  5. Like
    xeebot got a reaction from zeke in More CC3200MOD Questions   
    So, in case anybody else is curious, I've got the answer to my own question.
    Rename your bin to "mcuimg.bin"
    In Uniflash, go to the System Files, find /sys/mcuimg.bin

    Click the BROWSE button for URL and navigate to your file.

    Mark Erase, Update, and Verify.

    Go back to Flash Setup and Control, click Program.

    Enjoy.

    I really have to say that this is fantastic.I'm going to see what functions I can duplicate from CCS this way.
  6. Like
    xeebot reacted to Rei Vilo in More CC3200MOD Questions   
    We can consider Energia as a disruptive technology, in a way it allows a whole new group of users to develop on micro-controllers.
    Another strong trend is frugal innovation popular among companies, where a prototype developed with Energia may be good enough to be launched on the market. 
    The major difference between Energia and other Arduino-like frameworks is, Energia relies on professional-grade SDKs. Energia is based on TI-DriverLib and Energia MT on TI-RTOS now SimpleLink. 
×
×
  • Create New...