Jump to content

Dmaseko

Members
  • Content Count

    1
  • Joined

  • Last visited

  1. Dmaseko

    MSP430G2553 ADC

    Hi, I'm new to MSP430, I'm using a MSP430G2553 in a project and need help with an in depth understanding of programming the ADC10 inputs of the MCU. I'm using a potentiometer in order to light one of 3 LEDs. For example, LED1 lights up when input voltage is 1V or less, LED2 lights up between 1V and 2V and LED3 lights up when the input voltage is greater than or equal to 2V. I have attached my code below but I am not clear on how to read, convert and store a voltage so that I can use the IF statements to light the respective LEDs. #include <msp430g2553.h> void indicator_LED(); int main(void) { unsigned int i; WDTCTL = WDTPW | WDTHOLD; // Stop watchdog timer P1DIR = 0x00; P2DIR = 0xff; P1OUT = 0x00; P2OUT = 0x00; while(1) // keep looping { ADC10CTL1 = CONSEQ_2 + INCH_0; // Repeat single channel, A0 ADC10CTL0 = ADC10SHT_2 + MSC + ADC10ON + ADC10IE; // Sample & Hold Time + ADC10 ON + Interrupt Enable ADC10DTC1 = 0x0A; // 10 conversions ADC10AE0 |= 0x01; // P1.0 ADC option select ADC10CTL0 |= ENC + ADC10SC; // Sampling and conversion start __low_power_mode_0(); //__bis_SR_register (CPUOFF + GIE);// LPM0, ADC10_ISR will force exit if (ADC10MEM <= 0x228 && ADC10MEM > 0x1D6) { P2OUT = P2OUT | BIT1; for(i=0;i<=1;i++); } else if (ADC10MEM <= 0x1D6) { P2OUT = P2OUT | BIT2; for(i=0;i<=1;i++); } else if (ADC10MEM > 0x228) { P2OUT = P2OUT | BIT0; for(i=0;i<=1;i++); } else { P2OUT = ~P2OUT; for(i=0;i<=1;i++); } } }
×