Jump to content
43oh

jasiek

Members
  • Content Count

    4
  • Joined

  • Last visited

  1. Hey, I'm in the process of building a booster pack for a project I'm working on at our local hackspace. I've downloaded the templates from TI, and tried to import them into KiCad, but I get a message telling me there's a library missing. Has this happened to anyone else?
  2. The code in the example was wrong. Full writeup here: http://jasiek.me/2015/08/28/using-an-sd-card-with-a-ti-tiva-c-tm4129.html
  3. I've used Booster Pack 1, and set the module number to 2, the CS pin is PC_7 and I wired it accordingly. Here's how I have wired it: SD card pin -> Tiva 1 (CS) -> PC7 2 (MOSI) -> PD1 3 (GND) -> GND 4 (VCC) -> +3.3V 5 (SCK) -> PD3 6 (GND) -> GND 7 (MISO) -> PD0
  4. Hey, I'm trying to get my Tiva board to be able to read/write SD cards. Is there a schematic that describes the SPI connection between the board and the SD card? I've looked at the booster board schematic, and wired up the card accordingly, but I can't get it to work with neither the SD card library from the Energia github repo nor this: https://github.com/rei-vilo/SD_TM4C . I tried to look at the definitions of SPI.setModule in the repo to figure out which pins are wired to which module according to the SPI library, but I don't understand which hardware directory is meant for the boa
×
×
  • Create New...