alikian

Hi All,

I just wanted to share my design with for CC3200MOD. It has CC3200MOD and its minimum requirement including Antenna, plus Lipo Charger and regulator to work with LiPo Battery. And has pin layout of LaunchPad XL. And also has pinout for Flash and JTAG

I used CC3200 LaunchPad XL to program it.

So far I can confirm CC3200MOD and Antenna works fine and Antenna Gain is pretty good.

Here is the address and GitHub.

https://github.com/alikian/CC3200MOD

Hi All,

I just wanted to share my design with for CC3200MOD. It has CC3200MOD and its minimum requirement including Antenna, plus Lipo Charger and regulator to work with LiPo Battery. And has pin layout of LaunchPad XL. And also has pinout for Flash and JTAG

I used CC3200 LaunchPad XL to program it.

So far I can confirm CC3200MOD and Antenna works fine and Antenna Gain is pretty good.

Here is the address and GitHub.

https://github.com/alikian/CC3200MOD

Hi All,

I just wanted to share my design with for CC3200MOD. It has CC3200MOD and its minimum requirement including Antenna, plus Lipo Charger and regulator to work with LiPo Battery. And has pin layout of LaunchPad XL. And also has pinout for Flash and JTAG

I used CC3200 LaunchPad XL to program it.

So far I can confirm CC3200MOD and Antenna works fine and Antenna Gain is pretty good.

Here is the address and GitHub.

https://github.com/alikian/CC3200MOD

Guys, CC3200MOD is out but the price is pretty high $20 for 1K
And the other bad thing about it is that still doesn't have any Antenna on it and you need to put external Antenna.
 
Very disappointed.
 
http://www.ti.com/product/CC3200MOD/samplebuy

Guys, CC3200MOD is out but the price is pretty high $20 for 1K
And the other bad thing about it is that still doesn't have any Antenna on it and you need to put external Antenna.
 
Very disappointed.
 
http://www.ti.com/product/CC3200MOD/samplebuy

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

I would add the ICSP header. As of arduino 1.0, shields which want to use SPI should do so via the ICSP header and not via the digital IO pins, this allows for a workaround to the otherwise inconsistent SPI pin locations between different processors.
 
This would also allow you access to more of the XL boosterpack pins on the arduino shield if you removed SPI from the main digital pins too (or alternately if this is aimed at the tiva boards, they have multiple SPIs so maybe one in the traditional uno location and a 2nd on the ICSP may work)
 
Technically you dont need level translation for a proper 1.0 shield either, there is an IORef header which is meant to run at whatever voltage the host processor runs at and shields are meant to adapt to that, any level translation is supposed to be shield side and i2c pullups on shields should be done to IORef. Its probably an idea to keep the level translation though, there will probably be alot of shields released which will ignore IORef and there are a ton of pre-1.0 shields out there which of course dont even have a connection to IORef.

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

If you mount the pin headers differently (i.e., switch top vs. bottom) does it become a booster pack shield for Arduino (i.e. let Arduino's use booster packs)?

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

Hi All,
 
This my first prototype for Booster Pack that connect LaunchPad XL to Arduino Shields
It convert 3.3V to 5 Bidirectionaly, I just test it with my own Arduino Shield with SPI works fine.
I know board is too long and jumpers are not necessary, I will removed them.
 
It will help Arduino Shields as BoosterPack.
 
Thanks,
Ali

I should have an Energia beta release for this LaunchPad in about 2 weeks or so. Will update this thread once it is.