[Could not communicate with FET error = 35]

Yeah that last link zborgerd was my post on the e2e site.  Yes, it was a firm ware update.   So, apparently crossing the vcc into the tx pins instead of crossing the rx tx is not a good thing to do on the Rev 1.4 board.  The good news is the new Rev. 1.5 board won't have that issue anymore.  Oh well, it was only a $9.99 mistake, that is actually quite cheap for me.   

[Could not communicate with FET error = 35]

I am using rev 1.4 and the chip type has been verified to the 2553.

[Could not communicate with FET error = 35]

So, this is my first foray into using the msp430.  I am working on an WSPR beacon project.  Essentially, I have the code and the project materials.  I got the TI-LaunchPad MSP-EXP430G2 that came with MSP430G223 and it uploads the sample "Blink" that are provided in the Energria software.  When I replace the '223 with the chip I need M430G2553.  Trying to upload the same sample I get the following error:

 

Could not communicate with FET (error = 35)

ihex: error on line 43

MSP430_Run: Could not read Enhanced Emulation Module register (error = 20)

 

I could not find much info for error 35.  Is the MSP-EXP430G2 not compatible for the '2553?  Is there an update / library I need to get?  

 

Thanks for the help.  Chris