Prajay

I have ordered a SD Card booster pack to work with the CC3200 Launchpad, but the connector definitions do not match.. I was able to do some board modifications and make it to work with the CC3200 LAUNCHXL Rev 3.2.
 
Here is the ECO List
 
Scratch out traces at SJ1 , SJ2, SJ3, SJ4
Blue wire the following pins
SD Card Pin No       Header Pin
2                               J2.3
5                               J2.6
7                               J2.7
 
The board looks as below now with the changes. And it works !!!