Jump to content
43oh

lilyhack

Members
  • Content Count

    30
  • Joined

  • Last visited

Everything posted by lilyhack

  1. @Thorvard, thanks for the reply I was able to capture the mDNS packet from CC3000 @ F5529 at Wireshark without changing the pin. Now after changing the pin in the sketch, the result is still the same - mDNS packet from CC3000 is seen in Wireshark but not in the mDNS Watch app. Although I see my Apple devices in the mDNS Watch app. I haven't updated the fw_patch.h (don't have one for F5529). The naming is not really an issue for me. But the page http://<ip_address>/config.html loads very slowly Any thoughts?
  2. I am using MSP430F5529 LP with CC3000 boosterpack, Energia v12. My goal is to make the F5529LP device mdns discoverable so the mDNS Watch app can find it. Using example sketch 'SimpleWebServer', I have added below line after the wireless connection is established. But the mDNS Watch app can't find the F5529 device (the app can find other BonJour devices) void loop() { ....... int ret=0; ret=mdnsAdvertiser(1, "CC3000", 6); Serial.println("MDNS Advertizing returning!"); Serial.println(ret); delay(5000); ....... } I see that the mdnsAdvertiser call is returning -67 or 189. But
  3. @Thorvard Thanks for sharing. What do you mean by "...after changing the Boosterpackpins"? I am using F5529 LP with CC3000 boosterpack, Energia v12. Do I need any firmware upgrade? My goal is to make the F5529LP device mdns discoverable so the mDNS Watch app could find it. I tried adding mdnsAdvertiser(1, "CC3000", 6); in the SimpleWebServer example but doesn't work. Please suggest.
  4. Hi, I am having difficulty configuring CC3000 boosterpack with MSP430F5529LP. I did this successfully with MSP430G2 board earlier following the tutorial. So wondering if there is any such tutorial for MSP430F5529LP. I followed below steps, but I don't see the board version number or CC3000 IP address in the hyperterminal. Can anyone please help? 1. Take the out of the box MSP430F5529LP launchpad board (no jumper changes). 2. Get the patch programmer V1.11 loaded for MSP430F5529LP from here. 3. Get the CC3000 SDK V1.12 (latest) to get Basic WiFi Application for MSP430F5529. Modif
  5. Hi, I am following this video to create a simple web server on MSP430F5529LP with CC3000 Boost, with Energia version 11. The output of the serial monitor is attached. When I access the server IP (http://192.128.1.68/) from the browser, the page doesn't load. The boost IP doesn't seem legit. Look at the attached output and you will see the gateway is 192.128.1.254 but actually the gateway is 192.168.1.254 (got from cmd prompt ipconfig result). Similarly, the boost IP should be 192.168.1.68, not 192.128.1.68. Tried both in the browser but none works. It seems like my CC30
×
×
  • Create New...