Jump to content
43oh

mka

Members
  • Content Count

    2
  • Joined

  • Last visited

  1. The backlight issue was kind of my fault - i used PD1 / Pin 24 which is connected to PB6 on the launchpad board. With any different pin the problem is gone.
  2. With some additional hacking, my ILI9341-display connected to an EK-LM4F120XL ( One of those with LX4F120H5QR MCUs ) works with this library, too. - A software reset was necessary in the init sequence, after the ReadID loop ( copied from Seeeds original code ): delay(500); sendCMD(0x01); delay(200); - The SPI clock divider must be set to 1/8. This may be due to my wiring - see photo. SPI.setClockDivider(SPI_CLOCK_DIV8); - Drawing and text commands don't work while the backlight is on. Is that by design ? Anyway the information posted here was quite help
×
×
  • Create New...