Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by MWE

  1. When I run mspdebug from the command line I get this failure: ____ Microsoft Windows [Version 6.0.6002] Copyright © 2006 Microsoft Corporation. All rights reserved. C:\Users\Mark>mspdebug You need to specify a driver. Try --help for a list. C:\Users\Mark>mspdebug rf2500 MSPDebug version 0.20 - debugging tool for MSP430 MCUs Copyright © 2009-2012 Daniel Beer <dlbeer@gmail.com> This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. rf2500: failed to open RF2500 device. ____ But mspdebug can see the Launchpad: _______ C:\Users\Mark>mspdebug --usb-list Devices on bus 000: 000:000 0451:f432 eZ430-RF2500 [serial: 56FF42047150410A] C:\Users\Mark> ___________________________ Running testlibusb-win.exe gives me this: ___________ DLL version: Driver version: bus/device idVendor/idProduct bus-0/\\.\libusb0-0001--0x0451-0xf432 0451/F432 - Manufacturer : Texas Instruments - Product : MSP430 Application UART - Serial Number: 56FF42047150410A bLength: 18 bDescriptorType: 01h bcdUSB: 0110h bDeviceClass: 00h bDeviceSubClass: 00h bDeviceProtocol: 00h bMaxPacketSize0: 08h idVendor: 0451h idProduct: F432h bcdDevice: 0100h iManufacturer: 1 iProduct: 5 iSerialNumber: 3 bNumConfigurations: 1 wTotalLength: 53 bNumInterfaces: 1 bConfigurationValue: 1 iConfiguration: 0 bmAttributes: 80h MaxPower: 50 bInterfaceNumber: 0 bAlternateSetting: 0 bNumEndpoints: 3 bInterfaceClass: 2 bInterfaceSubClass: 2 bInterfaceProtocol: 1 iInterface: 5 bEndpointAddress: 82h bmAttributes: 03h wMaxPacketSize: 64 bInterval: 255 bRefresh: 0 bSynchAddress: 0 bEndpointAddress: 03h bmAttributes: 02h wMaxPacketSize: 64 bInterval: 255 bRefresh: 0 bSynchAddress: 0 bEndpointAddress: 83h bmAttributes: 02h wMaxPacketSize: 64 bInterval: 255 bRefresh: 0 bSynchAddress: 0 ______________ So it looks like libusb-win32 is installed right. It also looks right in Device Manager. This is on Vista64. The Launch pad has the 2553 installed but I backed up to the original chip that I had used under gdb in a previous msp430 tool chain I know worked, same error. The mspdebug I am using is from the pre compiled MSP chain XPG provides, just to limit the variables. I have tried forcing the serial number but that made no difference. Do I need another version of mspdebug than the current (0.20?) that's in the provided chain? Any ideas on what to do next? If there are any logs that would be useful in figuring this out just ask. After going back over the install several times and reading posts till my eyes are blurry I am still stumped. Help! Mark
  • Create New...