Rubi

Hi
 
I routed a small adapter board for the Olimex Msp 430 Jtag Iso programmer.
https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-ISO/
 
Adapter board:
http://oshpark.com/profiles/Rubi
 
The board is based on this schematic:
https://www.olimex.com/Products/MSP430/JTAG/_resources/SPY-BI-WIRE-CONNECTION.jpg
 
Since I don't need all three boards I would give one away for free if someone is interested.
 
Cheers
Rubi

Hi
 
I routed a small adapter board for the Olimex Msp 430 Jtag Iso programmer.
https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-ISO/
 
Adapter board:
http://oshpark.com/profiles/Rubi
 
The board is based on this schematic:
https://www.olimex.com/Products/MSP430/JTAG/_resources/SPY-BI-WIRE-CONNECTION.jpg
 
Since I don't need all three boards I would give one away for free if someone is interested.
 
Cheers
Rubi

This topic was some kind of progress report. I had long holidays between June and October, without topic related activity. I have list of functions that must be supported by flasher. There are two points left, fuse blow and customized BSL firmware update for flasher itself. Everything else is done, and I will not make any significant updates. At the end I will publish interface (flasher / PC - commands / data exchange) here together with source of PC side, and it will be very easy to integrate it in Energia, or make customized flasher on any OS. If anybody have topic related questions or some requests, we can discuss it here.
 
Complete SBW+ development hardware is here... 
 

 
On the left side are MSP430x5xx target boards. Two on the left top are MSP430F5435. On the right side are MSP430x2xx target boards. Two on right bottom are MSP430G2553 (with DIP sockets). In the middle are 2 MSP430F5510 boards with all pins available. Upper one is armed with SBW+ connectors to 8 target devices and it is used as main board for project development. Another one is flashed by BSL with last stable firmware version and it is used as SBW+ flasher to main board. All target boards have 5-pin SBW+ connection. At the bottom are 5-wire flat cables used for connection between programmer and target devices. SBW+ target device connection pinout is...
 
VCC
GND
PX.0 (X=1, 2, 3... J)
TEST
RESET

Just recogniced I don't qualify because of missing attention points.
So Automate was correct.
 
chibiace---------------------------------------------New Zealand
Cubeberg-------------------------------------------USA
JWoodrell-------------------------------------------Missouri, USA
Automate -------------------------------------------USA

Ok everyone, very big news to all those who registered for giving this kit some TLC.
There was some mis-communication about the kits and TI came forward with free "Full Working($149)" kits for everyone who registered here!!. I have 13 kits for all those who offered some TLC for the kits.
 
I may need a little help on shipping as these boxes are a little big. 
 
Big thanks to Dang Dung and William Cooper, @@adrianF at TI. Thank you for helping us out.
 
@@chibiace  @@cubeberg @@JWoodrell @@Rubi @@Automate @@grahamf72 @@oPossum @@dubnet @@roadrunner84 @@abecedarian @@rockets4kids @@legailutin @@Rickta59

I would be interested and should have no problems to repair a damaged one.
 
chibiace---------------------------------------------New Zealand
Cubeberg-------------------------------------------USA
JWoodrell-------------------------------------------Missouri, USA
Rubi -------------------------------------------Vienna, Austria

Just recogniced I don't qualify because of missing attention points.
So Automate was correct.
 
chibiace---------------------------------------------New Zealand
Cubeberg-------------------------------------------USA
JWoodrell-------------------------------------------Missouri, USA
Automate -------------------------------------------USA

hehe attention to detail guys
 
chibiace---------------------------------------------New Zealand
Cubeberg-------------------------------------------USA
JWoodrell-------------------------------------------Missouri, USA
Rubi -------------------------------------------Vienna, Austria
Automate -------------------------------------------USA

@@Rubi Good stuff. Keep the blog posts coming. Also add a link to your blog in your signature. If you are interested in doing a writeup on the OLED board, PM me.. I can sponsor you one if you are interested.

Hi
 
I posted a blog entry about your display booster pack.
 
http://rubines.blogspot.co.at/2013/07/nokia-5110-booste-pack.html
 
Cheers
Rubi

Hi
 
I posted a blog entry about your display booster pack.
 
http://rubines.blogspot.co.at/2013/07/nokia-5110-booste-pack.html
 
Cheers
Rubi

Hi
 
I wrote a blog entry about your booster pack:
http://rubines.blogspot.co.at/2013/07/ws2812-rgb-led-matrix-booster-pack.html
 
Cheers
Rubi

Hi
 
I wrote a blog entry about your booster pack:
http://rubines.blogspot.co.at/2013/07/ws2812-rgb-led-matrix-booster-pack.html
 
Cheers
Rubi

@@Rubi I may have one left. I'll have to check.
@@rockets4kids Yes!, finally!
http://forum.stellarisiti.com/topic/580-tiva-sighting/page-2#entry3405

Hi
 
I just made a little blog entry about this great and useful tool.
 
http://rubines.blogspot.co.at/2013/07/meet-powerscope.html
 
 
Cheers
Rubi

Hi
 
I just made a little blog entry about this great and useful tool.
 
http://rubines.blogspot.co.at/2013/07/meet-powerscope.html
 
 
Cheers
Rubi