Jump to content

Alwin

Members
  • Content Count

    6
  • Joined

  • Last visited

About Alwin

  • Rank
    Noob Class

Profile Information

  • Location
    Orlando
  1. Hopefully I get a response Im still having problems setting up the bluetooth module.
  2. Hi, I am running into a little bit of an issue at the moment. Following the schematics in the F28069M dev board I have set the JP7 off and JP6 on. These two jumpers I believe are the Mux values that would enable the Serial pins to use SCI. Looking at the pin map out on the F28069M launchxl dev kit I chose 19 and 7 for the bluetooth module. When I use the serial monitor or a blueterminal on my android device, I am not getting any response. Maybe someone in here can shine some light into my problem.
  3. i know that but I am confused as to per the data sheet of the F28069 Launchpad. I don't know how to change the pin mux settings.
  4. im using HC-05 bluetooth module.
  5. Hi, I was wondering, if I'm using a bluetooth module for the LaunchXL F28069 Dev kit, would I be looking at the Serial functions in energia? and what pins would i connect the bluetooth module to ?
  6. Hi, I recently purchased the LaunchXLF28069 development board and installed energia. I tried to run the blink example and i am getting this error error: C28xx: Error connecting to the target: (Error -1135 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5) Failed: Operation was aborted I have the latest code generation tool (V15.12.0.LTS) I have installed the drivers correctly and verify that it worked. Openned putty up and its sending data to the terminal with the corresponding reference temp.
×
×
  • Create New...