Jump to content
43oh

Wide

Members
  • Content Count

    13
  • Joined

  • Last visited

About Wide

  • Rank
    Member

Profile Information

  • Location
    Germany
  1. at first, i'm using the new Tiva C Launchpad TM4C123G is it possible to run any code untill i switch the Power off and then switch to Hibernation Mode with RTC if i would use an 3V Battery ?
  2. I had exactly the same problem when trying to run my application on an own build PCB with an usual Power supply. Then i decidet to give it an try and i used an Professional supplay and evrything worked as it should. i have to say Thx
  3. Wide

    RGB Aquarium Light

    THX JWoodrell , nice trick to increase ccr in the ISR ;-) very simple and working fine btw, this configuration is creating a 30Hz frequency but ;-) i will just switch it a bit up, dont know what frequence fisches can see
  4. Wide

    RGB Aquarium Light

    ok, i think 1kHz should be more then enough, the only question is how i have to write the ISR for the different CCRx registers
  5. Wide

    RGB Aquarium Light

    Sure, but on 20 Pin MSP430 there is no Port P3 where i can bind it to
  6. Wide

    RGB Aquarium Light

    ok my first version of AquaLED worked but.... RGB Leds arent bright enough, so i have to add a white stripe with about 6000 Kelvin as far as i know it isnt possible to use more then 3 PWM channels using the timers in Up mode -> I have to use continuous Mode with Interrupts can i write ISR for each ccr0/1/2 value?
  7. THX for this nice library, it's working really nice for me!
  8. Wide

    RGB Aquarium Light

    So here I am again Does anyone know where i can find rgb values for sunset/sunrise values. google cant help me very much
  9. Wide

    RGB Aquarium Light

    thx for the Help all is working fine
  10. Wide

    RGB Aquarium Light

    thx for the help, i will try this later today
  11. Wide

    RGB Aquarium Light

    ok, do i need to implement an interrupt then or is there an easier way?
  12. HI there, im trying to buld my own RGB Stripe light for my small aquarium. It should simulate the complete Day with sunrise, sunset etc. Now i'm trying to do all that just with my MSP430g2553. Im a typical Arduino User so i have some problems with my MSP The Brighntes of the RGB Stripe is controlled by 3 MOSFET's and there is my Problem: How can i set 3 PWM Vales? At the moment im trying around with CSS5 and the main.cpp uploaded here. Thx for Help Wide main.cpp
×
×
  • Create New...