Jump to content
43oh

kahva

Members
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by kahva

  1. This is fresh install of energia and there is no external editor selected in preferences. I'm using 64bit win7.
  2. Has anyone else encountered same issue that you can't type in sketch editor in the latest energia. Also when I try to click cursor to somewhere in the sketch or paint some line there's nothing happening. Any idea what could be the issue? I can upload sketches etc to launchpad but cannot use energia for editing the sketches. Also Tools menu is very slow on my energia. I already uploaded JRE but it didn't have any effect.
  3. Patching the usci_isr_handler seemed to work. Now both modules are working and sending data through two 6inch concrete walls. I'm more than happy about the transmission distance of these small modules. Thanks again.
  4. I just tested the modules with arduino at work and seems like those are working ok. I can read the registers, send data etc. If I do fresh install of energia from the windows installer do I need to patch it to get the modules working? I have been reading from this forum and from some blogs that energia has to be patched to get SPI working correctly. If energia needs to be patched how it is done? I earlier replaced energia SPI files with github SPI files but it didn't help to get the modules working.
  5. I have 2 modules and tried with both of them. The modules are atleast 2 years old and I think those might be destroyed by ESD as they were lying in a box with other misc electronics stuff. I'll order a new ones and try with those when they arrive. In the mean time I think I could hook up the modules to bus analyzer at work to see that are those responding at all. Thanks for the quick answers.
  6. I switched MISO and MOSI pins together and tried. The message from UART: Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Then I switched CE and CSN pins together and UART gave me message: Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT When I hooked the cables as they're supposed to UART gives me message: Enrf24 radio transceiver status: DEEP SLEEP <1uA power consumption Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Seems like the module
  7. Does the Energia need to be patched before compiling those examples? I have tried both TX and RX examples.. I will try to change the CSN, IRQ, and CE ports to other ports on launchpad.
  8. I tried to get this library working with MSP430G2553 and launchpad but seems like my modules are broken or something else is wrong. I tried to patch the SPI of energia also but it didn't help. I'm getting this through UART: Enrf24 radio transceiver status: DEEP SLEEP <1uA power consumption Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT And after patching the SPI I'm getting: Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Enrf24 radio transceiver status: NO TRANSCEIVER PRESENT Does anyone have any idea what's the issue or can someone provide detailed workflow
×
×
  • Create New...