Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won

  1. http://e2e.ti.com/blogs_/b/toolsinsider/archive/2013/08/19/happy-birthday-c2000-launchpad.aspx
  2. Welcome Mike, The C2000 has alot more to offer for the motion control market than the ARM. High resolution PWMs, chopping capability etc - Multiple hardware stages before the pin gets hot. I also like the invaluable real time debugging ability of the C2000 which the ARMs do not offer.
  3. You will have to setup another serial port SCIB and connect it to the GPS. For testing purposes, you can use SCIA connected to putty.
  4. Could you explain your issue again.. your problem is not clear enough.
  5. I could not figure out the mounts for the motors.
  6. I'd be happy to host it. This site needs a jumpstart anyway.. which I'm finding very hard to do. Let me know or PM me for help.
  7. I doubt there are any.. there are a few docs at the bottom of each chip page which should help you out.
  8. Via LarissaSwanland's twitter feed. http://e2e.ti.com/bl...f-together.aspx
  • Create New...